Shoutbox

• sc0user (28 Aug 2007 9:25)

  A note to all. I seldom check my shoutbox. Please post your queries on the open forum and I will answer them there. Thank you.

• Topman13 (13 Nov 2007 14:43)

  Hi, sc0user. Cheers for the help before.
  
  When Sky Sports play footy games, they always have that red button option to choose a game of your choice. So I was just wondering if theres anyway to see those games on the Eurovox?
  
  Also, back to my other problem. When i disconnect my splitter, the signal is fine and all the hcannels work. But when i connect it, I don't get certain frequency groups such as 395.00 (which has setanta sports 1). But it also depends on how far i screw the f cable in too. Like if you i screw it a little bit, i then get that frequency working but no signal on a lot of other frequencies. So i thought it may be the splitter and wires, so i have bought and tried other splitters and wires. But the same thing is happening. So i was wondering if you've heard anything else about this on the site, or know of how to improve signal?
  
  Cheers, Topman.

• sc0user (13 Nov 2007 20:29)

  @ Pete no problem whatsoever as said good to have you on board and please feel free to contact me at any time. I hardly check my shoutbox as it is better to answer queries on the open forum, (I know your shout wasnt a query but more of an idea which I appreciate), I have replied to your pms.
  
  @Topman, the red button will not work as this requires a talkback function which the Eurovox doesnt have for obvious reasons :) Where are you located and who is your provider? As said it is much better to post on the open forum as I will see it there as I seldom check my shout box and it will help others members with the same problem if we can find a solution to your problem.

• Topman13 (14 Nov 2007 12:45)

  i'm with virgin media, it used to be an old ntl area.
  
  Yer, i get that the red button wouldn't work, but was just wondering if there was nay other way to view those games, because you can see all the bbc interactive channels.
  
  Cheers for response.

• 3668young (14 Nov 2007 14:39)

  hi still getting $ sign at channels that arent working. any ideas please.

• 3668young (14 Nov 2007 14:40)

  sorry its a starview box

• 3668young (14 Nov 2007 14:44)

  dont know if my messages are sending. could someone send me a message please.

• sc0user (14 Nov 2007 19:16)

  Please post your query here [ link ]

• patsyq (19 Nov 2007 4:22)

  I am looking to get another starview, the one I have works brilliant but don't know who to trust now to get one any ideas plus mine came already flashed and have just recently updated it but some of these sellars are saying I need to unscramble it myself, its getting confusing, any comments would be greatly appreciated

• sc0user (19 Nov 2007 20:04)

  Depends on where you are as in Ireland or the UK. I would recommend a Eurovox either way much better.

• oggnogg (24 Nov 2007 12:33)

  Scouser my mate has the starview old box and it scambled the other day do u know the lastest key code

• colm6 (25 Nov 2007 7:09)

  hi there just wondering if any one has lost ch***s signal from about 16.00 yesterdayi i am using a eurovox and there is no signal being received is there a genernal siganl fault
  regards

• oggnogg (28 Nov 2007 12:36)

  Hi scouser was just wonder can u help me with a startview box i aint done fuck all with them before its aAPI ver:255e E Boot ver 7:0 22 july 2006 box do you have the image for it and the loader ya use and if possible the lastest code for the Dublin area N*L.Doing my head in here as always lol :P

• sc0user (28 Nov 2007 13:33)

  Hi ogg, you will have to first decide if it is a clone or genuine box as the firmwares differ, have a look here and let me know, [ link ] I am out for the match but will check in later.

• oggnogg (28 Nov 2007 16:42)

  Its a Genuine box its 7 x 25 fan holes

• sc0user (28 Nov 2007 18:07)

  Ogg I have sent you full instructions by pm as a bit too much for the shoutbox.

• oggnogg (29 Nov 2007 7:47)

  thx scouser i used this NTHELL - [19/10/2007]
  KEY 00 = D4 20 A9 A4 06 D1 3C 7D
  KEY 01 = 87 4C 47 FB FB 70 BD 17
  and only got up about 20 channels is there a later code

• oggnogg (29 Nov 2007 8:45)

  theres alot more there but scambled

• sc0user (29 Nov 2007 10:05)

  Ogg they are the wrong codes here are the correct ones for N** Ireland:
  
  Line 00 = A9 86 6E EA 39 EA 09 49
  
  Line 01 = 9E 40 85 78 E7 82 10 06
  
  But if you downloaded version 4 correctly it should have auto updated the keys for you. Also make sure the key emu is on, press menu type 1570 on remote and enable it.

• alanbull (29 Nov 2007 13:48)

  hello, sorry to bother you, how do i pm you? i know your busy and would be grateful for a few seconds of your time. many thanks
  alanbull

• oggnogg (29 Nov 2007 14:18)

  Worked perfect Scouser fair play to ya again :D

• sc0user (29 Nov 2007 17:34)

  Alan you will see a small head icon at the top right of any of my posts click that to pm me.
  
  @ Ogg no probs :)

• ngaharte (01 Dec 2007 14:26)

  do you know anything about mmds upc i live in greystones co wicklow ireland

• r3ma (02 Dec 2007 19:18)

  hey scouser was wondering whther u could help as i think that something that you've written could help me. I'm in london and doing a scan, i pick up alot of channels, 200 ish but none of the MVT channels such as MVT B@SE etc... was wonderin if some old software my help? my signal strength is about 80% which i thinks is about right... any ideas? or can u get hold of cdf for london?

• r3ma (02 Dec 2007 19:19)

  many thanks

• sc0user (02 Dec 2007 19:28)

  @ ngaharte as far as I am aware it is only analogue in your area.
  
  @r3ma it depends on your provider if your are ex C&* or Telepest scan on 6952 or if exN** try 6887. More than likely you are missing some transponders, plug directly into the incoming feed and take away any splitters.

• SRFC08 (05 Dec 2007 14:37)

  Hi Sc0user seen good few of your posts you seem to know your stuff would you mind having a look at my post and replying just need info on a box for NTL MMDS Celtic71 suggested the eurovox max 2008 should work for me but it hasn't I tried it in my mates house who has the ordinary NTL digital and it worked fine there thanks Here's where I posted: [ link ]
  
  Was Over at the Porto game there last week was savage some craic in the park and sandown afterwards

• sc0user (05 Dec 2007 19:01)

  It will work on N** MMDS as long as your have the correct downconvertor and power insertor as you will see a few people have responded to your query. And please use 6887 for symbol rate for N** not 6952.

• corkman (06 Dec 2007 14:41)

  hi scouser i like in cork ireland and on ch**us i have aerial on the roof could u tell me if the d-digital box or the eurovox tx will work for me and if not could u suggest a box that would thanks for your help

• corkman (06 Dec 2007 14:43)

  hi scouser i like in cork ireland and on ch**us i have aerial on the roof could u tell me if the d-digital box or the eurovox tx will work for me and if not could u suggest a box that would thanks for your help

• sc0user (07 Dec 2007 8:37)

  Those boxes are having a few problems with Ch**us MMDS at the moment, give it a bit of time before you purchase one as the problems should be resolved then. You could try a Dreambox T but these are a bit harder to set up.

• dunlin1 (07 Dec 2007 12:43)

  hi lost my channels,,any update codes please

• sc0user (07 Dec 2007 16:47)

  You will find them on the usual codes page.

• Lee0204 (08 Dec 2007 9:43)

  Hi Scouser
  Do you use msn at all?
  
  Cheers
  Lee
  YNWA

• sc0user (08 Dec 2007 18:41)

  Sorry Lee I dont but feel free to post a query on the forum.

• freck (10 Dec 2007 14:43)

  Alright scouse check out the itgate thread,what more can i say

• mrmagooo (12 Dec 2007 9:02)

  yes it works fine m8 thanks again
  
  magooo

• ken63 (12 Dec 2007 13:17)

  Hi Ya scOuser I have a eurovox tx and live in cork and cannot get it to pickup anything when i either auto scan or manual scan . I have tried factory reset and also reflashed the box but still F---k all . Any ideas mate

• jack143 (12 Dec 2007 19:17)

  hi
  i am jack from glasgow got star view box couple of months backsome body in baraland, since then the code has been changed many time and all the time i need code i check your page and the code is there this time i have registered my self on this forums site and this is my first mail on this to you to say that u doing realy great job mate and i really appriciate your work.
  keep it going it helps so many people
  thanks again
  jack

• sc0user (13 Dec 2007 19:05)

  Thanks for the kind words Jack, enjoy Afterdawn and get posting :)

• donalz (14 Dec 2007 11:42)

  hi sc0user i have everything ineed 4 thebox i need thebox _ireland_h20070705_450eE_api.bin
  but anttime i download it i cant open it and if i could open it where wud i put it plz thanks

• jboyle (14 Dec 2007 21:08)

  hey scouse check out my pics??hope we beat the scum sunday!!LOL J :)

• sc0user (16 Dec 2007 9:30)

  @ Donal as I said you need to use the gtromloader. Download the Starview Guide from the FTA Library this will show you what to do.
  
  @jboyle its halftime and they are lucky so fingers crossed we can pull it back.

• Tunnest (19 Dec 2007 13:12)

  Thx scOuser, so you mean to get it working need to change to either of those you mentioned? Any alternative? not in my area only sly

• sc0user (19 Dec 2007 13:42)

  Only works on cable, so sly is your only alternate, you could try a satellite set up and receive thousands of channels, but sorry to say thats not my field :)

• Gofar (20 Dec 2007 14:59)

  Hi scouser,
  
  just wondering if you know about using a certain type splitter or coaxial i have a starview clone & arnet stbs tried to set it up last night but the arnet went blank and the starview done the same, any help would be much appriciated. cheers

• sc0user (21 Dec 2007 11:09)

  Have a look at this kit [ link ]

• shaniz (21 Dec 2007 18:50)

  alright mate. thanks for your help on my question. looks a bit daunting on that site for anewbie like me. if you can find the time to go through it step by step with me i can pay you for your time if i get it up and running. nshaniz@hotmail.com best wishes neal

• sc0user (23 Dec 2007 20:10)

  shaniz I have replied to your pm also unfortunately I am not allowed to discuss modding CC boxes as it is against forum rules.

• sc0user (29 Dec 2007 15:51)

  Pathat I have replied to your pm with the help you need.

• oddfellax (30 Dec 2007 7:01)

  hi scOuser
  i have a eurovox max 2008 had it a couple of months put pin in to stop kids using wrong channels but now i've forgot the pin (Doh) is ther a way to find my pin.

• milan1980 (31 Dec 2007 18:38)

  How do mate!!
  
  Happy new year to ya
  
  Got a prob with clones starview think i need to do this
  
  1.Remove the cap (c21) electrolytic near the ribbon on the psu board.
  2.Boot the box , it should boot to on and function correctly , the psu will hum ignore it , just let it boot to ON ,then turn it back off.
  3.Replace electrolytic cap (c11) 1000 mic @10v on the psu board , resolder (c21)
  thats it done.
  
  But i am a complete newbie to this type of thing any chance you could explain in plain english and maybe with a diagram???
  
  Cheers matey!!

• wardex (04 Jan 2008 18:55)

  hi scouser have a euro vox v 2008 black ,seem to be dead the only lights on clock look like : in the centre please help

• sc0user (06 Jan 2008 17:27)

  Sorry Folks been away on holidays if any of you still have problems please post again.

• rabbit85 (07 Jan 2008 9:29)

  hi ya i just got all the chanels back from updating the code but i lst the chanels again about 5 mins after anyideas i am on tw in the west midlands

• sc0user (07 Jan 2008 9:58)

  00- 3B-BE-CE-6D-F4-73-4A-4B
  01- CB-D6-3B-B6-17-F3-41-98
  
  Try these but they have changed four times today so dont know how long they will last.

• rabbit85 (07 Jan 2008 12:02)

  no good sc0user i have tried every code so far 5 of them is there anymore going to come up today ? please let me know when you can thanks for all your help today so far

• sc0user (07 Jan 2008 12:12)

  Yep they have changed again why not update your firmware as I have given you instructions on how to do this.

• sc0user (07 Jan 2008 13:08)

  Last ones I have rabbit try these:
  00: 3B BE C3 6D F4 73 FA 4B
  01: 18 5B C5 7D AA A8 1E E0

• rabbit85 (07 Jan 2008 13:13)

  dude thank you very much it working now but dont know how long for lol but thank you

• sc0user (07 Jan 2008 13:21)

  Your welcome, fingers crossed :)

• Indy2005 (07 Jan 2008 13:21)

  thank you mate.

• seat183 (08 Jan 2008 11:23)

  Alright mate, Im from liverpool , having probs with my starview, tried keys nothing on, how do i find out what area am i for sure, last time i put keys in yesterday used telewest ones in and worked? Not getting nothing with new keys i got today. Cheers mate Joe . Seat183

• sc0user (08 Jan 2008 13:14)

  Try the ones here [ link ] if they dont work first time, press the default key and input them again.

• sc0user (09 Jan 2008 7:09)

  Updated Telepest codes are here [ link ]

• al_cud (09 Jan 2008 14:51)

  hi i was woundering which company is it best to use for star view 2 in liverpool and does anyone know how much the chepest deal is.
  
  cheers

• markb1 (09 Jan 2008 15:40)

  wondered could you help me mate.
  have the box and mistakingly deleted a channel from it,is it possible to get it back?
  
  btw
  YNWA

• sc0user (10 Jan 2008 6:29)

  @al-cud any VM company will do, your are probably on Telewest. Google wizardsatellites as they are the main dealers.
  
  @mark just do an autoscan and it will appear at the end of your channel list.

• markb1 (10 Jan 2008 6:36)

  cheers sc0user,thanks for the reply.

• funtommy (10 Jan 2008 16:42)

  Hi Scouser... sorry to be a pain but just started new Eurovox thread cos tearing me hair out... you seem like the guru on this so was wondering if you could give us a hand... Thread is Eurovox Max 2008 Flash Problems...
  
  Ta in advance mate.

• fergalmc (11 Jan 2008 7:33)

  Hi Scouser
  
  Do you know if the Eurovox works in Kinsealy, Swords with Chorus cable??

• sc0user (11 Jan 2008 10:14)

  Yep should do using symbol rate 6875 and a frequency range from 250.000 to 450.000.

• markb1 (11 Jan 2008 19:57)

  done an auto scan to add the deleted channel and it didnt work,any other suggestions mate?

• sc0user (11 Jan 2008 20:27)

  Try a factory reset, turn box of from back switch for a minute then back on, go through installation and autoscan again. You will lose your channel order and have to sort it again.

• Skybabe (13 Jan 2008 17:51)

  hi just wondering could you have a look at my thread eurovox 2008 please help

• paulkb (14 Jan 2008 9:31)

  hi m8 do you no anything about eruo boxs mine went off and i cant get it back on it was working at night but when i got up it was not working many thanks paul

• sc0user (15 Jan 2008 17:08)

  @ Sky I will have a look
  @Paul maybe just a code change and it will come back, if it still hasnt let me know.

• tonydw (17 Jan 2008 6:40)

  thanks scouser i must be ok then as wene i done the gtm loader i got the 100% its not went off since doing it last week so fingers crossed cheers scouser

• sc0user (17 Jan 2008 9:46)

  Cheers Tony :)

• DAVEY29 (17 Jan 2008 16:13)

  Hi sc0user yer the man thanks for all the help

• sc0user (17 Jan 2008 20:08)

  @ cody yep it will copy firmware from one box to another just make sure you clone the non rolling box from the AU one.
  
  @Davey no problem anytime :)

• sc0user (18 Jan 2008 8:52)

  Rumours are only that, I have heard them for years, yes their time will come to an end and then we just go with something else :)

• cilecta (19 Jan 2008 11:33)

  Can you help me? i have the euro 2006 box on n*l, and i lost all the channels whilst doing a power scan? i updated the firmware today and put the sym rate to 6875, it found some chanels but not all, plus the ones it did find are all scrambled and no picture. i live in teesside, does you know if im doing something wrong, or what the sym rate should be, or freq range, or anything that might help
  
  appreciated

• sc0user (19 Jan 2008 15:18)

  I have answered your pm.

• kearnsyd (20 Jan 2008 19:33)

  alright mate, do u know wat the story is with ppv chanel on starview is n how i could get it back ?? thanks

• paulkb (22 Jan 2008 9:17)

  hi m8 do you no about euro voxs mine is not working i went to bed and it did not cum back on

• sc0user (23 Jan 2008 8:52)

  @kearnsyd, it will come back on when it starts broadcasting again, nearly an event time.
  
  @paulkb is there power still going to it and if so what does it say on the front LCD. Also is it a Max V?

• postyandy (23 Jan 2008 14:43)

  hi, i have thbox pvr n everything works fine except when in the epg. it freezes the box and resets itself. its driving me barmy and making it difficult to set the recording. many thanks.

• rabbit85 (24 Jan 2008 8:43)

  HI SCOUSER CAN YOU HELP ME MY SPECIAL EVENTS CHANEL HAS GONE ON MY STARVEIW AND USUALY IT HAS ADDS ON IT A WEEK BEFORE THE EVENT BUT IT STILL BLANK AND THE EVENNT IS SUNDAY NIGHT ANYIDEAS PLEASE LET ME KNOW

• lspeno (24 Jan 2008 16:08)

  Hi sorry to bother you. I live in the liverpool area and have stopped recieving tv 1700. Everytime i try to watch it, it loads to about 180 - 200% then starts over again. Do you have the latest codes or frequency to fix this?
  Thanks for your help

• tomasd (25 Jan 2008 12:55)

  hey scouser was just reading the lads comments about newbridge/kildare area bought box 2 days ago and can't get any channels whatsoever. i've API VER 4.50E BOOT VER:7.0. I have cable in and scart lead connected autoscan keeps giving me no channels. Living in athy area in kildare. just tried manual codes i got from this site from guy in newbridge area and they dont work. I've previously turned emu on but now cant get back into that menu with1750. I have ch***s analogue coming directly into apartment. no digital service in this area through cable only through aerial receiver. does this make a problem. what can i do HELP PLS

• sc0user (25 Jan 2008 13:12)

  @postyandy sorry to say the EPG is not the best either way, what firmware have you got?
  
  Lads/ladies the PPV/Events channel is there just not broadcasting yet in some areas, it will come on when it is closer to the event.
  
  @tomasd I have answered you on the forum.

• redcax (25 Jan 2008 14:27)

  Hey Scouser.
  Anu Idea how to get the digi vox back up and running?
  I have no idea and its been gone all day long
  PLEASE HELP ME!!!

• sc0user (26 Jan 2008 6:24)

  Not a digivox guy sorry but I think Celtic has answered you in the main forum.

• corwal (26 Jan 2008 13:40)

  hi
  i am really new to this, i know i am probly repeating threads but here goes. i have a eurovox 08 and was told to unplug it on fri so i did and tried to put it back on today and it wont go out of standby mode,any ideas ?

• sc0user (27 Jan 2008 15:45)

  Sorry folks I have been away for a bit, can you repost your queries on the forum and I will answer them there.

• postyandy (28 Jan 2008 8:24)

  hi scouser i have e_ver 4.500 6 jul 2007. n im pretty sure its a genuine one. many thanks.

• sc0user (28 Jan 2008 8:34)

  andy send a pm to jbvideo he is the PVR guy tell him I sent you along.

• clacks (28 Jan 2008 13:40)

  you seem to be the man with the knowledge.... eurovox 2008, epg on the box won't match the epg on my windows media center. gives me all kind of grief when i want to record something. on windows media i downloaded the epg for ntl dublin digital. where am i going wrong? sorry to bother you but i posted on the forum and go no replies
  cheers

• thesquad (28 Jan 2008 17:20)

  hi my starveiw went down today 4.30pm.the screen says scrambled .entered the codes ,no joy reset factory settings and switch on emu,no joy when i did the auto scan no signal came up on the screen.none of the channels are coming up or dollar signs when you scan .when it has finished it says 0 channels .any ideas thanks

• thesquad (28 Jan 2008 17:33)

  im in north dublin if that means anything thanks

• sc0user (28 Jan 2008 17:35)

  @clacks sorry I know a lot about the EV but not on integrating it with WMC.
  @cableview time to relax :)
  @thesquad no signal usually indicates a cable problem in your area so it should come back.

• clacks (28 Jan 2008 17:46)

  cheers anyway. think i figured it out.........

• sc0user (28 Jan 2008 19:17)

  No problem, like to pass on the info :)

• thesquad (29 Jan 2008 2:39)

  hi scouser i have a ntl box + broadband which is working ,i put the ntl box on the tv that had the box and it worked first time, thanks

• sc0user (29 Jan 2008 7:36)

  Good news :)

• thesquad (29 Jan 2008 12:33)

  hi again got my starveiw back working again ,i did exactly the same things as i did last night ,might of been finger trouble ,thanks very much for your time,

• pound1 (31 Jan 2008 5:55)

  Thanks to Scouser for all the help over the last few weeks.
  I owe you mega pints

• sc0user (31 Jan 2008 8:44)

  No problem pound may collect one day :)

• roc1975 (31 Jan 2008 13:16)

  hi mate
  do you know is it possible to tune in radio merseyside on the box?
  and if so how would i do it?
  thanks.

• sc0user (01 Feb 2008 7:06)

  @roc sorry not from there so unsure, but you can only get what your provider supplies.
  
  @dig latest codes are always found in the main codes page, look at any of my post and click the staview problems link at the end of it.

• netguy40 (03 Feb 2008 16:48)

  hi scouser friend lives in dundalk has ch----- and a sagem box with card has all channls so took cable and put in to input for cable did a scan got all failed 2 day earlier did scan on n-- and got everything when i was scanning i changed provider to ch----- nothing no channels found it has lastest up dater help need

• sc0user (03 Feb 2008 17:55)

  What do you need to know as your query is a bit confusing? As in AFAIK sounds like he has an MMDS feed, what box were you using?

• netguy40 (04 Feb 2008 2:24)

  sorry scouser it "the box "sure it starview 2,,,what is mmds anyway i read true few forums is it way of using aerial im not sure what it is if it is mmds is there anything he can use to get box working

• sc0user (04 Feb 2008 6:21)

  MMDS is if you have a feed via a mesh dish on your roof or are communally fed from an MMDS transmiter. There are a number of boxes that will work on MMDS, The Box will work on N** MMDS, however if it is Ch**us MMDS, which you seem to indicate you will need something like The Box T or Eurovox TX.

• netguy40 (06 Feb 2008 19:24)

  thanks scouser can u get all channels with the box t as u would starview or the box is the channels on normal cable the same as mmds will u get the same thanks mate

• sc0user (07 Feb 2008 8:05)

  No dependent on your area you will have anywhere between 80 to 94 channels on Ch**us MMDS.

• teza12 (07 Feb 2008 12:11)

  teza12 here is this the rite link scOuser for starview problems teza12........

• sc0user (07 Feb 2008 12:30)

  Yep you will find it under Starview Keys & Info on the top left of this screen BTW I answered you on the main forum as some areas may be having problems.

• IrlMonk (12 Feb 2008 9:08)

  Hi Scouser ;),
  edited original post from here and put it into the main forum
  Thread:The Box-picture quality problems
  Apologies for jumping the gun and not reading the rules first.

• sc0user (13 Feb 2008 10:56)

  Sorry cannot see your link above.

• IrlMonk (15 Feb 2008 8:20)

  Hi Scouser,
  here is the link: [ link ]
  Thanks

• dmelia (15 Feb 2008 10:47)

  thanks for the codes

• falc0n001 (15 Feb 2008 13:16)

  thanks sc0user forgot to refresh the main page thanks again

• sc0user (15 Feb 2008 19:26)

  Cheers Folks :)
  
  @Irlmonk you say his cable comes in from the roof is he on MMDS?

• IrlMonk (18 Feb 2008 8:18)

  Hi Scouser,
  No it's not MMDS but Cable.
  Thanks

• craig09 (18 Feb 2008 11:32)

  hey Scouser if i completely cancel my subscription with cho**s will i still be able to get the channels through my eurovox? thanks

• sc0user (18 Feb 2008 17:45)

  @craig answered you on the forum
  
  @cableview best of luck and will send people your way if they need services in Glasgow ;)

• sc0user (18 Feb 2008 17:49)

  @IrImonk sounds like a cable problem to me is he scanning directly from the incoming feed?

• leevines (20 Feb 2008 9:22)

  hi sc0user do u know the codes for the starview box?????????????

• sc0user (20 Feb 2008 12:54)

  Yep look top left of this page, "Starview Key & Info", click it.

• IrlMonk (21 Feb 2008 6:39)

  Hi Scouser..... ;)
  The mate had a look at the cable and everything looks good. He is scanning directly from the incoming feed.
  He has pointed out that, although RTE1 & RTE2 will not appear on the screen, you do get the channel indicator appearing which shows the signal strength as good as any of the other stations.
  Any ideas or comments are welcome.
  Cheers

• sc0user (21 Feb 2008 9:01)

  I have answered you on the forum.

• dub8 (22 Feb 2008 10:19)

  hi sc0user was onto you already but didnt get too far with your directions no bill gates me but my problem was i lost 3 channels in the dub area any way you could help again sorry for trhe bother,dub8

• teza12 (22 Feb 2008 10:28)

  teza12 calling scouser any chanse of sending me starview box(clone one)main boot up file,have the comp lead to box.

• sc0user (24 Feb 2008 17:00)

  @dub what box do you have?
  @teza you need fixed 2.57eE and gtromloader V4you will find both in Eamos FTA Libray top left of this page.

• seanmacca (27 Feb 2008 5:07)

  hi scouser its seanmacca ere from just down the road i was wondering if you can send me the new telepest codes i carnt find them in forum cheers.

• teza12 (27 Feb 2008 9:22)

  hi scouse teza12 starview box is acloned one silver with black front panell and 5 silver buttons at bottom of black pannel,,,,,,,

• anto88 (27 Feb 2008 10:51)

  this is anto88,i have a dreambox 500c some channels not staying on.Tried a booster,from argos it did not work.Got some info,Try the option-old tuner,in the dw image,and reboot the box.I did not know how to proceed,as im new to this.would be thankful for some guidance!!!!!!

• rafaben (27 Feb 2008 15:11)

  Hey scouser
  im living in dunboyne castle.i rang hthell and they have arrange an mmds install for sat week.i had an appointment before but they never showed.i believe they have done a lot of work in the meath area.do you reckon i'll be able to get it.or maybe you can point me in the direction of someone who can?
  thanks in advance
  
  fellow scouser

• sc0user (28 Feb 2008 18:37)

  Rafa I have answered you on the forum ;)

• fatsam123 (29 Feb 2008 15:53)

  top codes m8 thanks

• dandan431 (05 Mar 2008 7:54)

  Hi Scouser
  
  I have posted on the forum but had no response. As u seem to be the font of all knowledge can you answer this or point me to a relevant post on the subject..
  
  My friend currently has legitimate Vermin Media whereby the vermin 'box' provides both the TV and broadband i.e. no seperate broadband modem. He is looking to buy a Starview 2 box to provide TV (on my recommendation) but I'm not sure how this will affect his broadband. I assume he will need to keep the Vermin Media box (for broadband) as well as the Starview..is is simply a case of buying a splitter for the cable?? I am sure I have read a few posts on here about splitters causing problems - or is that just during the initial scan/setup?
  
  thanks in advance

• mbw123 (05 Mar 2008 11:36)

  hi scouser sorry to be a pain
  can you help me you seem to be the one who knows a lot
  im new to this got starveiw 2 & 3 sly sports how can i resolve this problem once again sorry
  maurice

• sc0user (05 Mar 2008 19:50)

  @ Dan I have answered you :)
  @mbw have you tried a factory reset and rescan?

• netguy40 (08 Mar 2008 3:22)

  hi scouser
  
  was wondering any new channels outn yet see crime investigations and movies 24 being adv not out yet
  thanks

• patmul (08 Mar 2008 4:19)

  hi scouser a pool fan fair play to you!live in waterside estate malahide and have chorus ntl mmds digital aerial on roof, just purchased eurovox tx plug and play and connected terrestrial to antenna port at back of box and scart cable from tv to back of box as instructed by manual but no channels will tune in,can you help me with what you think i may be doing wrong or what you would suggest i do as i paid 125 euro and bought this box under recommendation 2 days ago from " i want a box"
  cheers mate

• sc0user (08 Mar 2008 19:40)

  @netguy just press the red button in user installation and any new channels will appear at the end of your channel manager. Sorry dont know your location or provider so cannot say which new channels if any you will get now.
  
  @patmul, bit of bad news for you........ you have the wrong box as your area is N** MMDS and a standard Eurovox Max V will do your supplier gave you the wrong info.

• netguy40 (09 Mar 2008 4:01)

  sorry scouser i live portlaoise but it for my dad i gave him box for christmas he loves it and mom too lol they love hallmark they live dublin 12 crumlin on ntl before i touch the box and try scan lol did u hear of any new channels thanks

• JPMAC08 (09 Mar 2008 10:29)

  Hi an you help me I live in Lusk abd one like to purchase a MMDS N** digital box to access free channells d you know where I can purchase one and how much they cost.
  I was previously signed up with NTL but changed to sky do I need to sign back up with NTL's basic package for the box to work.
  Thanks for your help my emailddres is jp_fiona@hotail.com
  
  JP

• clarkey29 (09 Mar 2008 17:43)

  hi scouser jus registered wit this site i'm a beginner my eurovox has fucked up tried powerscan an that but wont cum on.all me m8s r ok jus mine how can i flash it m8. need help a fellow scouser i brought mine from the pool

• SeedyEFC (10 Mar 2008 17:23)

  Alright lad fellow scouser here. where abouts where you from? where you living now? anyway I have just bought thebox-t for chorus mmds but i was wondering if there is anyway I can get ITV4 on it? I am a complete newbie at these boxes.

• sc0user (12 Mar 2008 8:52)

  @netguy some new music channels and a psychic channel dont think your mam and dad will be too pushed on them :)
  
  @jpmac try google affordable cable good guys and good prices. You need to still have all your MMDS equipment in place thats all.
  
  @clarkey29 need your location and provider details.
  
  @seedy I am on your side of the water :) ITV4 is unavailbe in Ireland on cable/MMDS.

• murray69 (12 Mar 2008 16:00)

  hi guy i just got the eurovox Maxv i dont know how to set it up when i press the yellow button it says wait to delete channels ive tried to follow the instructions on the paper that comes with it im on ntl dublin would love to get some help im going mad with it my e-mail is martinmurray69@gmail.com

• sc0user (13 Mar 2008 6:35)

  I have replied to you Martin.

• shellayl (14 Mar 2008 9:52)

  Hiya Sc0user, can u help :)
  do u know if the starview box will work in tippeary on chours ntl?

• up2ujay (16 Mar 2008 11:17)

  Hey can u help me skysports 1? i do not get it. I get a blank screen. I have got skysports 2 & 3 which works fine. Please get back to me soon as possible. thank you Jai

• notbrazil (17 Mar 2008 17:24)

  Bout ye Scouser
  
  You seem to know a bit about the The Box PVR. Just purchased one. Auto and Manual Scan are coming up with nothing. Do I need frequencies or something. The Manual is well...
  
  Missing Brum beating the Mags.

• sc0user (19 Mar 2008 12:05)

  Sorry folks I have been away for a few days. Are you all sorted yet?

• spex2k (21 Mar 2008 17:46)

  scouser you seem to be the person to turn to for help?
  i have the box pvr but cant play back anythin over 35mins long and i have the loop cable in place were it should be. any ideas on what the problem could be

• kaner10 (22 Mar 2008 17:53)

  sc0user i am just a new user i have a euro-vox max V.i live in Navan and im on chor#s i can only get 67 channels im lookin 4 the liverpool ch. and any others you can give me cheers

• sc0user (26 Mar 2008 7:53)

  @spex, send a pm to jbvideo as he is the PVR guru.
  
  @kaner have you tried 444.000, 452.000 and 460.000?

• sc0user (27 Mar 2008 10:13)

  Presume its a Eurovox, have you tried it from the direct feed? Where are you and who is your provider?

• kellfc1 (27 Mar 2008 10:13)

  hi ya i am wondering if you can help me ,, i have sky at the mo and can you tell me if the starview boxes work with sky or is there another box that does x thanks

• sc0user (27 Mar 2008 10:36)

  Nope Sly isnt hacked.

• kaner10 (27 Mar 2008 15:57)

  yeah scOuser i tried them codes and i never got any more channels,Cheers anyway
  kaner10

• kirbya (28 Mar 2008 17:55)

  See Celtic 71 shout page. I've put THE Box Bin File on Starview 1 box, now box is frozen. Starview Bin Files will not overwrite THE Box Bin File. Can anyone help????

• iwdublin (29 Mar 2008 18:10)

  alright, i have ntl basic, what codes do i use to update my eurovox?? its saying codes being updated for ages. ive gotten to page after typing 1968.
  regards, iw

• sc0user (31 Mar 2008 19:49)

  @kirbya you need to use the bad flash method here [ link ]
  
  @iwdublin the Eurovox updates itself, just put it on any Sly sports channel.

• joeskiner (03 Apr 2008 16:00)

  scouser please help!! having eurovox's latest problem(updating for days... the link for the update is removed.. can you post it for me please?? thanks so much

• sc0user (03 Apr 2008 20:52)

  Joe if you are in Ireland you need to manually input codes have a look here [ link ] If you are in the UK please provide more info on your problem.

• 08shelly (04 Apr 2008 6:46)

  Can you help me iv tried puttin the codes in and it still says Please wait, codes being updated.......

• prize00 (04 Apr 2008 10:05)

  Many thanks for the method and keys for N..L it work fine for me. What is wrong that autoup date of keys is not working since last night 3-4-08 many thanks

• kmcl2007 (04 Apr 2008 11:23)

  sorry if im a pain but my starview still hasnt updated. tried few tings.still no luck, cud u tell me few tings i need to do or wots wrong.dnt usually have problems with it. thanks

• pawiskey (04 Apr 2008 14:50)

  ScOuser
  just followed your instructions for inserting the new codes for T*L and it worked perfectly, thanks a mill, your a diamond.

• paddyclog (04 Apr 2008 15:49)

  Scouser
  
  My Frequencies (NMDS NTHELL) are all off from ur list
  I am not getting the channels listed under 402 395
  
  Have they changed ?

• euroboy (04 Apr 2008 16:13)

  Hi - I have a euro-vox Max V and all the channels got lost last night - do you know how I can get them back?

• sc0user (04 Apr 2008 19:40)

  Folks I have answered all of these queries either by pm or on the main forum.

• philzz (04 Apr 2008 19:50)

  Hi im new to this, I somehow deleted all my stations and havent a clue to get them back on, could you please help

• sc0user (04 Apr 2008 20:58)

  What box do you have, who is your provider and wher are you located?

• sinserh (06 Apr 2008 7:34)

  hi there do u know have the codes changed for ntl for the eurovox maxv 2008 i cant see channels it just keeps saying its updating codes?

• joxer1 (06 Apr 2008 17:30)

  Hi there. I have just been given a dreambox 500c and I want to use it on N*L in Dublin. What image would you recommend for this and will I have probs due to the recent changes ?
  Thanks for your help.
  J.

• ragy (06 Apr 2008 17:43)

  hia scouser,dublin liverpool fan here,gary by name ,you seem to be the man with the answers,so...any chance you could send me the latest codes for ntl,dublin,ireland,i have a digivox maxz,thanks mate

• sc0user (07 Apr 2008 9:06)

  Any looking for CODES look here [ link ]
  
  @joxer DW2.0 is quite good, you will have to manually edit your keylist.txt with latest codes until a fix comes out.

• Seanylad (08 Apr 2008 14:55)

  alright mate! dont know if you want to help a strugglin everton fan!!! cant figure out this eurovox 2008. have entered codes but cant suss out what to do next. have some channels but not the good ones like sky sports and setanta! i need me football!!

• netguy40 (08 Apr 2008 17:47)

  hi scouser,question mate i have starview about a year i not sure what firmware i put in it but last couple days it not updatin it goes to 240% goes to black screen with caption on bottom say what on now and next and when put new codes in comes on that was friday now tonight monday same happing is it that firmware is old needs updating coz not sure which one it is or is someone tryin cause problems if it not good firmware which u recommend thanks mate

• sajuk (08 Apr 2008 17:56)

  Hi,
  
  Having read the post about "Code being Updated" it seems you might ahve the answer for me also, i got the same issue, i ned the codes for my area, i am in birmingham, west midlands,
  could do with the
  provider codes
  key 00
  key01
  
  Thanks
  saj

• johnby (08 Apr 2008 19:29)

  FAIR PLAY TYA. IF IT WERNT FOR PEOPLE LIKE YOURSELF
  ID BE FUCKED. TA FOR CODES.

• ianew (09 Apr 2008 4:17)

  hi fellow scouser my vox box satin updatin codes my supplier is virg** coulkd u pls help me ou thanks ian

• mariescot (09 Apr 2008 4:43)

  hi scouser.. hope you can help me..i live in glasgow ..<and> box as every 1 elses is saying codes being updated...can you please tell me what to do ..thanks marie..... im with virg

• atyrrell (09 Apr 2008 5:03)

  scouser hoping for your help again as usual! a mate has a eurovox V got it last year and it does not autoroll Is it possible to up to it to update any software to it to make this happen? thanks

• ognib (09 Apr 2008 6:39)

  have you codes for liverpool put them in once and changed again.ta ognib

• patsyq (09 Apr 2008 8:10)

  Hi scouser, why has the thread been closed and no replies are able to be made. Is this a temp measure, I know the place is going crazy at the moment with the starview boxes and eurovox boxes down and they dont seem to be auto rolling. I have 2 starview box, one is working fine but the other I have to put in the codes from the box that is still working to the one that is down and hey two working boxes for the moment

• paddy086 (09 Apr 2008 8:38)

  Hay Scouser thanks for all you help so far with the eurovox. question for you i have a tv card in my computer and was woundering if there was software that would work like the eurovox box but on my computer could you help me in want it is or point me in the right direction
  thanks

• furryrat (09 Apr 2008 9:15)

  HI SCOUSER
  you must be in a good mood after last night !! anyway i was wandering if you could help on the recent signal change 8.4.08 i kep getting PLEASE WAIT CODE BEING UPDATED,i have tried all the things in your old posts but alas nout,please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

• SteRicho (09 Apr 2008 9:37)

  Hi Scouser am from liverpool and iv have got a Eurovox maxv 2008 box and last night it came up on it " Please wait, Codes bein updated." i waited for about 30 mins and it just never moved off that. So i deleted all my channels and did a power scan and after doing that it done the same thing. Most of the channels wont work it just keeps saying that. I ended up falling aswell and when i woke up this morning its saying the same thing. After i came home from college i checked the box and it got the same thing saying. Any idea how i can fix this box. I am on TELL**EST.

• LDM2008 (09 Apr 2008 10:58)

  Hiya, Im new to this but as everyone as experienced, Last night my eurovox max v channels went down. Almost every channel saying updating code, i followed a link to new codes 00 and 01. Unfortunately, i dont know where or how to get to the bit to enter these codes and as you seem to be the MAN WHO CAN i wondered if you could help me???
  
  Thanks

• giggyb (09 Apr 2008 11:09)

  Would you know the codes for eurovox for manchester area. tried many codes but no luck . you seem to be the guy to ask. many thanks

• LDM2008 (09 Apr 2008 11:43)

  Me again, ive found where the codes go but unfortunately they aint working :( has anyone else had any look with the codes?? Im TW and from west bromwich. if you could send me the codes to try i would be dead greatful. e-meil me at: lt004g5868@blueyonder.co.uk
  
  thanks again

• ppeel (09 Apr 2008 11:44)

  Hiya Scouser this is pete from leeds i have 2 eurovoxes 1 early 2007 and 1 back end 2007 lost all channels can you help.This is first time its happened in our area i dont know which code to put in can you tell me please.
  thanks pete

• mutrag (09 Apr 2008 12:21)

  Hi mate, looks like you're the man with all the answers for the eurovox???? Mine has stopped working in Warrington and I haven't got a clue what to do, got the leads but no software/firmware etc????
  Help please...Cheers Mutrag

• oakline (09 Apr 2008 12:33)

  hi hows it going can you help me flash my box its called the box super starview 3 i'm lost and my head is wreaked lol thanks

• GB1 (09 Apr 2008 13:22)

  Sc0user
  
  Can you help, my eurovox (2006) wont update following last nights blast! i have tried turning it off and putting back on to SJY Sports but its a no go!
  any suggestions? New to all this so any help would be appreciated
  cheers
  Glyn Leeds

• nippero (09 Apr 2008 16:50)

  Any info on Glasgow *irgin codes?

• jarrad07 (09 Apr 2008 17:59)

  hi lad am in L10 with an original starview and no joy with anything yet any new firmware due or new codes i have had no probs for months but all down now

• scotchsdh (09 Apr 2008 18:23)

  I don't know if you sene my comment in a thread but you seem to be helping alot of people out so may I be cheeky and ask you to try and help me ? if so I brought a eurobox+ 2008 and most of the channels to be scrambled and when trying to put in the latest keys it doesn't do nothing keeps saying updating please wait

• sc0user (09 Apr 2008 20:53)

  Sorry folks due to the recent hit I cannot answer here for a while however I have answered simlar queries on the main forum pages, all your answers are there :)

• sc0user (09 Apr 2008 20:55)

  Sorry folks due to the recent hit I cannot answer here for a while however I have answered simlar queries on the main forum pages, all your answers are there :)

• anto1969 (10 Apr 2008 15:29)

  scouser the main page for codes has not yet been updated Ive posted the ones for N*L ireland on my profile hope it helps someone

• vosene (10 Apr 2008 17:28)

  alrite my eurovox max v has gone off do u have any codes only got a few stations it just says its updating cheers

• anon100 (11 Apr 2008 8:42)

  Scouser,
  I would really appreciate your thoughts on this....I live in the Preston area and have had heard that some women in the Deepdale area phoned Virgin when her Eurovox stopped working the other day (codes being updated). Virgin found out she had a Eurovox and tipped off the police. I am led to believe that the police have raided several houses in the Deepdale area, and have given people £5000 fines if they are caught with a Eurovox. I have been told that they are doing random tracings of signals to peoples houses and busting them. Can this be true? Is it possible to trace Eurovox? What are your thoughts on this?
  
  Cheers,
  Anon

• SteRicho (11 Apr 2008 9:10)

  Scouser any new code for the eurovox man V i am also in the kirkby area.

• AMURILLO (11 Apr 2008 10:26)

  Hi Scouser im having a load of trouble with my starview 3 the box pvr,could you guide me on how to do it right,i have just updated it with the latest firmware it being BoxPVR_E_v4506_15Oct
  i auto scan my box but it only gives me a few channels and nearly all of the channels that are missing are movies and sports,also i cant goto the emu screen could you tell me how to do it,i have done the parental control by pressing i then 2007 aalso 2004 even done 1570 on the main menu but still nothing
  thx

• lizann (11 Apr 2008 13:43)

  hey i am also having trouble uploading my starview you talked me through it the last time and everything went fine but i am stuck again

• airz007 (11 Apr 2008 16:14)

  hi scouser trying to decide whether to update firmware but afraid may have a clone box mine is eurovox max v do yo know anyway of finding out sorry to be a pain thanx!!

• slee137 (11 Apr 2008 16:22)

  hi you helped me in past , my cloned starview [ntl] is going down every day,i have downloaded the latest 257e-E fixed firmware and was working this morning but not updating now , any help would be brill cheers stephen

• gillyjack (11 Apr 2008 16:54)

  hi scouser problem kryptview box lost all cable channels scrambled due to key change trid satdownloads server down can you help

• scouse412 (11 Apr 2008 18:04)

  Hi lar, can you help a fellow red out, I've never up graded my eurovox box or my nokia dbox2. Do you have any simple 2"fool proof" instructions on how to do it. Thanks a fellow KOPITE

• netguy40 (11 Apr 2008 18:51)

  hi scouser
  download new bin file 4.01 switched sv on went to bbc2 said scrambled bad channel then updated and bang it came on after 240% as it use to but reading other tread they say to 00 00 00 00 00 00 the key code and then auto update did and went back to old way black screen with caption on bottom had put codes back in for dad he goin mad lol did u hear anything else
  cheers mate

• westbrom (12 Apr 2008 3:19)

  THANKS for the codes and info you helped me great

• blue2006 (12 Apr 2008 6:16)

  Hi Scouser, ANy idea how to get it working with cho*us?
  I have a EVMAX 2008, was working ok up to this mess.....
  Flashed the new firmware, restored fact settings, power scan, itfinds all the channells, but after it stucks to please wauit firmware being updated.... thanks

• seat183 (12 Apr 2008 8:00)

  hey scouser can u please PM me . Is there going to be a new image to fix all this havack with the dreamboxes.

• kengriff (12 Apr 2008 10:46)

  PLEASE HELP A FELLOW RED SCOUSER...PLEASE!!!!!!!!!!!!!!!!
  
  I have got a euro vov max v box, an of course I have lost the channels like everyone else.
  An I am trying to figure out how to update my box, but to be fair I cant really understand some of the words or meanings that you have posted in how to update the frequency.
  Is there anychance you could e-mail me or message me how to do it, but in a way I could understand. Navigating round the menu an things like that I can understand. I am sorry if this sounds soooo cheeky an I could understand if you said no...but I would really appreciate it if you could help me out...PLEASE!!!
  
  hope to hear from you soon

• shacky26 (12 Apr 2008 12:24)

  Hiya scouser. Im hoping you can help me, my problem is the same as kengriff's above ive also got the eurovox 2008, and as you can guess im having a complete nightmare. Iam actually based in Manchester, the reason why i tell you this is incase i need a specfic code for my area. I hope the fact that im a manc won't affect you helping me. + Im going over to Moscow to watch the final between Man u and Liverpool and may the best team win!
  Looking forward to your reply
  Cheers

• rains (12 Apr 2008 12:35)

  Scouser, Can you shed any light on whether we i update a Eurovox 2 ?
  
  Thanks

• stecaz (12 Apr 2008 12:37)

  Hi scouser was hoping you could help, i have a max-v box and i have looked inside and there are no red marks on the screws, i have been trying to flash but with no joy. I have been using an rs232 female/female cable i bought from maplins on friday but when i try to connect to the box it just says "waiting for responce from reciever". I think i am using the correct software "the max v 2008 software" . I took all the leads out of the box except for the power and the rs232 leads before starting, any advice would be most welcome, thank you.

• mylucy (12 Apr 2008 16:51)

  Hi Scouser,
  I've got a eurovox max box bought 18 mths ago. I can only get poor man's TV..channels 1, 2, 3, 4, AND 5. All other channels are saying updating data. If you have time would you be able to explain what I have to do to restore my missing channels plz...Oh I'm in Bootle Merseyside in case I need a special code..
  Thanks a lot....
  Hope we win the semi-final......

• ddde (13 Apr 2008 6:16)

  hi i live in Basildon Essex i have a eurovox max v box it has been saying code been updating for the last 3 days have you got any advice for me thank you and im on telewest thank you

• Nexusdub (13 Apr 2008 15:58)

  go on the pool.fuck the codes .rafa is god.all rigt man any idea if i can upgrade from starview 4.00 to auto roll .same thing is happening on me other one the box version 4.00.we will beat chelsea and then bate the bollox out of united in finall.up the pool.steve gerard.

• gorfit (13 Apr 2008 17:55)

  Hi can u pm me how to get fun cards 4 my ntl pace box

• sewsunker (14 Apr 2008 20:23)

  Hiya Lad, just to let u know i have a PVR The box and during the last few weeks it did not go down at all! it has ver 4.506 15 oct 007.
  i used the codes from my pvr to use on my s/v 1 clone and me mates gen s/v 1. it worked. if u know anyone who want the firmware for the pvr box let me know.
  ta
  
  ps. plz let me know when the really firmeware is out for the clones?

• RogerRock (15 Apr 2008 12:13)

  Hi sc0user hope this is the bit for PMs ...
  
  I have posted a few times on the forum about not being able to use any updates after 15/10/07 do you know of any way to solve this problem? I have searched through the forum also but cant find any answers.
  
  Sorry for sending this direct to you but didnt want to keep posting the same question on the forum.
  
  Keep up the great work by the way.

• RogerRock (15 Apr 2008 12:14)

  Hi sc0user hope this is the bit for PMs ...
  
  I have posted a few times on the forum about not being able to use any updates after 15/10/07 on my Eurovox MaxV 2008 do you know of any way to solve this problem? I have searched through the forum also but cant find any answers.
  
  Sorry for sending this direct to you but didnt want to keep posting the same question on the forum.
  
  Keep up the great work by the way.

• boyhee (15 Apr 2008 20:16)

  alright scouser good to c your a pool fan me too anyway im from dublin i have the box i updated it from 4.00ee to 4.50ee i wanted to ask a pro before i update again but is there a newer version of ny firmware thanks mate an lets do fulham no favors like last year

• steve_90 (16 Apr 2008 13:42)

  Hi mate, i have a euro vox max and the codes u have gave work fine on my box, but my mate has the same box and the yellow button does not bring up the table to type in the codes for some reason. Do u have any ideas why or know another way to fix it? thanks for your time

• ufc43 (16 Apr 2008 14:07)

  Hello Scouser,
  I have the box in Dublin. I'm not having any problems with codes but it now updates the data every ten minutes. It usually updates to 300% and takes approx two minutes. Its running on API ver: 4.50e_E Boot Ver:7.0
  5.Jul.2007. Have you come accros this problem?
  Cheers,
  ufc43

• chris152 (16 Apr 2008 16:20)

  hey scouser, do you know how to get into the secret menu on the kryptview, thanks for any help

• sikang (17 Apr 2008 8:35)

  hi can you give euromax v codes birmingham telewest stopped working today cheers

• sikang (17 Apr 2008 8:35)

  hi can you give euromax v codes birmingham telewest stopped working today cheers

• sikang (17 Apr 2008 8:35)

  hi can you give euromax v codes birmingham telewest stopped working today cheers

• kamh786 (17 Apr 2008 11:18)

  codes for warrington

• SuperJari (17 Apr 2008 13:11)

  Scouser, just dropping you a line here so as not to spread panic on the boards. Regarding NTL Dublin as of the 20th of April (Sunday next)they will be doing an automated signal change every 5 minutes, have you heard this??

• fearmatt (17 Apr 2008 16:40)

  hi mate i have a 5ooc box and put new codes in the other day and all my channels came back. virgin media have changed them again today do u have a clue what the new codes r thank

• seansc1 (18 Apr 2008 8:30)

  Hi Scouser. From the boards I see there is a way to update the eurovox box so it will constantly pick up the channels. Could supply the info on this or the link.

• Tommy40 (18 Apr 2008 9:33)

  Hi can you give me sum help please.I have a nokia d box it went of last week so i did a service scan but nothing changed.I then found out that most had gone down as well so i have updated the codes and it is working again but i have lost a lot of channels.To scared to scan again incase i loose more channels any advice much appreciated cheers Tam

• deegan35 (18 Apr 2008 12:46)

  ha scouser deegan35 here any news on a new firmware update for the eurovoxmax v 2008 please read earlier that you where hoping to test one soon ?

• Nexusdub (18 Apr 2008 15:18)

  allright scouser any idea which bin file i need for the box.there is 6 of them in emos library.thanks pal.im in dublin ireland.

• funkyfive (18 Apr 2008 18:27)

  Scouser,
  has emo put the fix for starview clones into his library because I could only find crypstar v1.4 257 file

• millerlfc (19 Apr 2008 11:40)

  ello fellow scouser ive got d
  reambox 500c dreamup file an dw 1.6.2 flashed box ok plug into tv blank screen can u help me m8 new 2 this do i need dw v2.0 file let me no pm me cheers

• gilly44 (19 Apr 2008 13:05)

  hello are the starveiw boxes getting blocked

• funkyfive (20 Apr 2008 6:40)

  scOuser Help. I have a starview clone and downloaded the file just released this morning. When I connect everything up and go through the process, as listed on previous posts,the flash fails and asks me to retry.I have tried averything from switching off box and computer ,reconnecting and still no joy.Any ideas???

• lucanred (21 Apr 2008 11:10)

  Hi Sc0user, I'm gna try flashing my SV later never tried b4 so if you can help i'd appreciate it I av been askn every1 i no for a null cable managed to get a loan today, also have usb serial connector. have version 4.00e on sv at mo have GTrom and cyptstar downloaded ready to go on it. If the lead is an rs232 will it just not work? PM me if you have any addition tips that may help, gona read help files now so hopefully won't need to hassle you. Want to get it done today as I'll be too wound up tommorow, Gona stuff these russians!!!

• mandy07 (21 Apr 2008 18:24)

  hi just want to say thanks for all the help over the last 2 weeks or so much appreciated downloaded the ch**us firmware and its great thanks again

• justme24 (22 Apr 2008 17:55)

  hay I was just wondering if u can help me I have a Euro vox 07 and have all the channels but alot of them are coming in all messed up like the movie channels and the sport channels it's a wreck the head as I can't get 2 watch all the Liverpool matches suck as the one's on Setanta. Is there anyway I can fix this please mail me bac if u have a solution to this.

• ghl (23 Apr 2008 16:57)

  hello have a starveiw the box when i switch it on it starts up with the 4 bars going across display on front and stops on last bar and it on does not come up on display any help please thanks

• sewsunker (23 Apr 2008 17:26)

  Celtic can u help plz...
  
  i have loaded the new firmware (sunrise) for clones on my s/v 1 clone box but some of the channels are frezzing and breaking up (starplus, shopping channels) but other channels r fine(sky). network provider is telepest in liverpool.
  
  thanks

• golass (24 Apr 2008 8:23)

  Tanx so much for your help......(,)*

• sc0user (24 Apr 2008 9:24)

  Sorry Folks I have not ignored my shout box, but I couldnt physically answer all the queries in here as I would rather do it on the open forum where it helps all members.
  
  To everyone who said thanks.... thanks :) And to all that eventually got sorted by using the Main Forum Pages well wasnt it worth it :)

• jootoole (24 Apr 2008 15:56)

  Easy...I've had a mare with my friends starview II. I updated mine no probs but his is freezing on the scan. I've tryed everything.
  
  I'm prepared to send it to you, i'll pay you to look and even more if you fix it...
  
  get back to me if you're up for it...
  
  cheers

• gamblor16 (24 Apr 2008 18:15)

  hey how do i do a factory reset?? silly question..

• snub357 (25 Apr 2008 6:30)

  thanks scouser luv your pics we were unlucky the other nite we get them at stamford talk 2ya soon snub357

• boyhee (25 Apr 2008 16:19)

  scouser i was updateing a eurovox max today i lost all channells but got them back but now it says no signal can you help asap please and what firmware should i update it with now please help

• anon22 (28 Apr 2008 11:21)

  Hi Sc0user. i'm lookin for some advice and i'm hoping you can help, i got stung with a st*rvi*w clone, wasn't aware what to be looking out for, my own fault i guess, anyway, i'm wondering if i use the file CryptStar-v1.4-Core257 will i get my autoroll back or will it kill my box? Your advice would be much appreciated. Thanks in advance.
  
  Anon22

• lynchie68 (28 Apr 2008 12:12)

  hi m8 i live in the lanarkshire scotland codes just went again ,on bigmaq still the old code wen do the new ones g on ta

• calcon (28 Apr 2008 12:31)

  hey scouser will u be able 2 help me get euro vox codes for newcastle pleas mate

• teza12 (28 Apr 2008 13:52)

  tezza to scouser clone starvieubox up and running (box kept freezing then it was going off and on 2 capasetors went down renewed both every things working ok ) ps let me know if you want to know which 2--------

• sc0user (28 Apr 2008 18:56)

  Let me guess Teza was it the C21 and C11 ;)

• woolyback (29 Apr 2008 10:01)

  Hi mate thanks for the info on the EurovaxV. I am not hooked up to Virgin until moday so I wont be able to try it until then. I;LL get an adapter for my Lap Top. Cheer Bud

• mbe (30 Apr 2008 8:43)

  scouser, my f*n c**d box has been down since 1st week of april, do you happen to know any body around in birmingham, who could update the ex t/w**t box and its c**d
  cheers

• teza12 (30 Apr 2008 13:38)

  teza yes scouse the 2 capaseters c11/c21 went down you were right mate thanks scouse '''''''''''''''''''''''''

• brehony1 (30 Apr 2008 16:06)

  hey scouser, wonderin do you have any guide to crack the nthell pace box, tanx

• sunu (05 May 2008 8:48)

  hi mate, could you help me, my box doesn't seem to wrk anymore. can you provide me with codes for c&w, or direct me were i can obtain these,

• sunu (05 May 2008 11:42)

  plsssss, can you help i need codes for C&W, and how do i scan channels, as they dont appear when i auto/power scan them

• sunu (05 May 2008 11:49)

  when i go to scan channels, it states please check your cable satus Pls can you help me?????????

• adge93 (06 May 2008 16:40)

  Scouser mate got problem with eurovox maxv when in the middle of watchin somthing it comes up no signal and keeps loosin signal any help...tried takin it to some one who has the same box as me and seen if it would do the same from his house and still did it any solutions mate...thanks alot.
  Adge

• Arronetta (08 May 2008 15:51)

  Scouser, I chatted with you over a year ago and got my box updated. Since then I've just got the new codes as and when i needed them through the update page. However I'm a wee bitty confused. I don't understand what the Firmware is or how I get it onto my box. I've got a starview but think you told me it was a clone. Does this matter. Will i not be able to update without this Firmware.
  Sorry if i'm being dense but really don't have a scooby about this stuff!!!
  Thanks
  Arronetta

• HiTeck (10 May 2008 11:39)

  Funny Guide To Posting!! LMAO

• Blue4Ever (12 May 2008 9:53)

  Alrite mate, I've got a Starview, my mate is after one now aswell but obviously the original one's that I've got aren't available anymore, what do you recommend Starview 2 or 3? and where do you recommend for getting it from? Thanks.

• scott73 (12 May 2008 12:45)

  alright scoucer ,any chance u could forward me the ntea l code and let me know where i can get them from in future....cheers my man........walk on

• scott73 (12 May 2008 12:51)

  sorry mate its a starview,scott73,glasgow

• lavo99 (13 May 2008 5:40)

  hi there sc0user mate my starview box is of and i cant find the codes can u help ??? or if i send u my e-mail can u send them to me ?? thanks p,j lfc

• Dagootch (13 May 2008 14:47)

  Hi
  Can you tell me which Firmware is the best to use for the 2005 Eurovox, will this sort out the coding issue ? thanks in advance. Dagootch

• rusty74 (13 May 2008 15:42)

  alright m8 can't seem 2 get satanta sports 1 any more on my eurovox box 2008 any idea's

• POOL08 (14 May 2008 9:16)

  Hey bud! can i ask ya a question since u seem to be the main guru on the starview boxes. Like others...do you kno wer to get the n*l codes? I appreciate it

• CITYROLER (14 May 2008 10:58)

  anyone know how i can get codes starview box live in dub.thanks

• neill0018 (14 May 2008 15:14)

  hey pal i know we are not allowed asked for codes anymore but any info would be greatly recieved as i am in a bit of a pickle. thanks alot pal
  my email is: neill0018@gmail.com
  
  El Nino 4ever 20:10 14th may 08

• decce (14 May 2008 16:18)

  any codes for n*l ireland im desperate i cant find them anywhere?
  
  golddarren@hotmail.com

• fad087 (14 May 2008 17:02)

  could u tell me were to get codes for nt hell im computer illiterate so i cant upgrade box my e-mail is fad087@yahoo.ie

• Whelo79 (14 May 2008 17:46)

  Hey mate, I can see from all the above comments that your head is probably melted but do you know any new sites were codes are being posted? Much appreciated and sorry to bug ya!

• steo46 (14 May 2008 17:58)

  [ link ]

• PaulyMac (14 May 2008 18:24)

  Hi mate, youv'e helped me before and I'm hopping you can again. Is there anywhere else I can get codes for me Eurovox in the Dublin area on NThell? If not then no worries Roll on 08/09 for number 19!! YNWA

• PaulyMac (14 May 2008 22:17)

  its ok bro, found them elsewhere.

• sc0user (15 May 2008 11:15)

  Think Steo's link above may be worth a look ;)

• PaulyMac (15 May 2008 15:34)

  its just a link to a tool-bar?

• tecnogeek (15 May 2008 18:15)

  hey scouser tecnogeek here and i really am no codes no worries we find another way. thanks for all your help in the past only problem is i read all about flashing and i think of old guys in mac don't understand the tecno babble have you an idiots guide for me to get the box back up and running
  thanks

• sc0user (15 May 2008 19:48)

  Paul did you have a look at it? You might see something in this just a toolbar ;)
  
  @tecno I had to remove your email addy as you dont want spam mail do you ;) BTW which box do you require a guide for?

• PaulyMac (15 May 2008 20:50)

  ahhhh, now i see. cheers bro. but like i said i found another way. ;)

• sc0user (16 May 2008 7:02)

  Many ways to make an egg Paul just need to know how :)

• Chloe32 (16 May 2008 10:19)

  hey scouser i was wondering if you can give me a step by step guide on how i get my eurovox to work i've been imputing my codes manually but since the codes aren't getting put up anymore i'd like to get a permanent fix i have no idea where to start or what i need if you can help me you can mail me @ chloe.132@hotmail.com
  
  thanks hun

• tony45 (16 May 2008 15:26)

  hi sc0user as chloe32 above i need a step by step guide on how to update my starview [clone] i have the null modem cable and usb adapter just cant seem to get all the info i need sorry to bother you with this but i am a complete novice on computors

• sc0user (16 May 2008 19:07)

  @ Chloe what EV model do you have is it a Max V?
  
  @Tony you have the cables you need the rest of the info you need is here [ link ]

• Chloe32 (17 May 2008 11:20)

  yes i have a max v sorry i'm pretty new at this

• ppen (17 May 2008 16:28)

  hi scouser can you bail me out i need cod-s for n@l dublin eurovox and if u know anyone in dublin that can update my eurovox thanks as im usless at tech stuff

• sc0user (19 May 2008 12:03)

  @ Tony you will find all you need here [ link ]
  @ Chloe your guide is here for the Max V [ link ]
  @ppen if you have a Max V follow the guide I gave to Chloe easy honest.
  @Cityroller I have deleted your post as it has your email addy in it, I will answer you on the open forum.

• tecnogeek (21 May 2008 16:03)

  Thanks scouse eurovox max and thanks for getting rid of e-mail i'll check your shoutbox again

• sc0user (22 May 2008 12:54)

  techno if its a black Max V 2008 model just use the link I gave Chloe above. If its another model let me know.

• manny_v (23 May 2008 16:03)

  Sc0user
  
  Do you what happened with www.satfiles.co.uk? Looks like many of us have been fleeced out of a tenner after signing up as VIP members. The site is completely gone.
  
  I am pretty user I have seen your posts on that forum as well.
  
  Thanks

• sc0user (24 May 2008 9:55)

  Manny I was a Mod there, I have answered your pm ;)

• noodle22 (25 May 2008 12:00)

  hey just back off hols any chance of ntl dublin starview genuine codes...in process of updating firmwae but wont be til mid week at earliest. please and thanks

• Gollum72 (26 May 2008 14:46)

  Sc0user, could you PM me your answer to manny_v, I too have been looking for the site where I used to be a member after buying boxes from Wizzard Satelitte, any advice you can give would be appreciated. Cheers

• corkman (26 May 2008 16:09)

  hi scouser i bought a nokia the box off someone and i can not get the menu passsword from them and now the box is down do u no any thing i can do to
  thank you

• sc0user (27 May 2008 12:59)

  @ corkman try username/login: root
  password: dbox or dbox2 Also if the box is down try a new updated image like Andromeda have a look in this link for more info [ link ] takes a bit of reading but all your answers are there.
  
  @Gollum all cable sections have been closed at Satdownloads/Wizard.

• jack143 (28 May 2008 11:31)

  hi mate i was wondering if i could get some help regarding c**ds as i m in scotland,any help would be highly appreciated .
  cheers
  jack

• sc0user (28 May 2008 17:54)

  Have a look back at Steo's link in my shoutbox.

• linny40 (29 May 2008 6:50)

  Hi Sc)ucer thanks for all your help matey!

• sc0user (29 May 2008 9:19)

  Youre Welcome linny :)

• Johnmc10 (30 May 2008 14:24)

  Hey mate, Heard about you from one of my mates. Can you help me, I have a starbox genuine 25 x 7 ports...it stopped working yesterday, it used to update itself but now just says bad or scrambled channel? maybe you could advise me?
  
  Thanks,
  
  John in dublin.

• gris12 (30 May 2008 15:13)

  Hi
  Help please. Never joined before, just looked for c*des and all is well.Now c*des no longer available, my box is not working in t*le*est area. I have read the box can now auto roll and no need to keep putting in key info. I have absolutly no idea about downloading firmware etc..
  Is there a very very simple place I can look to resolve issue. Or have I got it wrong and box will not auto update. Thanks very much..

• sc0user (30 May 2008 23:38)

  Presume they are Starviews for the both of you have a look here [ link ]

• judas101 (01 Jun 2008 22:22)

  hey scouser.
  
  youve been very helpful thus far however i'm having trouble updating my firmware on my eurovox.
  
  i just posted a thread about my problem. i'm nearly finished. im stuck on the last step.
  
  the cfd file is not being recognised.
  
  if you could help me out again it'd be much appreciated.
  
  thanks,
  
  kev

• lov3ly (02 Jun 2008 8:09)

  hey my firmware is always one digit out when it updates the code wha is the problem here?? i noticed no codes are longer posted up. how can i solve this one digit out thing????

• lynnet17 (02 Jun 2008 8:38)

  hello please can you help need updates for midlands . blonde so please help lol dont understand all this flash stuff just know how to put newcodes in

• lynnet17 (02 Jun 2008 8:38)

  hello please can you help need updates for midlands . blonde so please help lol dont understand all this flash stuff just know how to put newcodes in

• sewsunker (02 Jun 2008 17:25)

  Hi do you know if there is a High Def box out for cable ie. starview or eurovox that is HD ready?

• sc0user (03 Jun 2008 17:40)

  Post over on the forum folks or just check the stickies all answers are there.

• leevines (06 Jun 2008 12:53)

  hi have u got the codes to starview please...west midlands on telewest
  kind regards
  leevines

• pharey (06 Jun 2008 16:22)

  Hello mate is there any news on the new codes my box is saying codes bein updated again and cant find any links to anything? any help would be much appreciated. cheer.

• eagle52 (07 Jun 2008 9:46)

  eagle52 any updates on telepest codes tried usual links and urls no luck
  can you help thanks

• balcee (09 Jun 2008 12:58)

  hI Scouser, I hope you're well.
  
  Was after a bit of advice. I've been cleaning out the garage and found my old 'On Digital' box (Nokia MediaMaster 9850T). I've hooked it up and can pick up the standard free to air channels but the subscription channels say 'Please insert smartcard'.
  
  Have you ever played around with these boxes? If so, how can I get past this obstacle?
  
  Look forward to your reply.
  
  Bal

• sc0user (10 Jun 2008 9:41)

  Sorry balcee we are not allowed to discuss subbed boxes here, hope you understand ;)

• filbur (10 Jun 2008 14:11)

  scOusercan you help me ,its with the eurovox when i connect the cable to pc and box i can get the download screen but when i click download it cannot find the com port i have checked the cable and it has worked on my friend's eurovox but not mine any clues as what to to ..thanks in advance

• sc0user (10 Jun 2008 19:35)

  Answered you on the forum

• dubstar1 (11 Jun 2008 16:58)

  Whats up Sc0user. Im looking for the latest softeare for a Digi vox. Any help would be great

• sc0user (11 Jun 2008 19:13)

  Try Eamos FTA Library top left of this page.

• Evastar (12 Jun 2008 9:01)

  Love your sig pic!

• gunner171 (12 Jun 2008 17:21)

  scouser thks for d advice on d stairview3 didnt relise there was new firmware 7.05 everyhing grand no thks

• tomfitzg (13 Jun 2008 13:55)

  sc0user,
  Looking to buy a genuine eurovox max v 2008 box for the one another, can you give me a good reliable source as i am afraid of buying a clone box.
  
  Many thanks,
  Tomfitzg

• jjgg (14 Jun 2008 12:42)

  hello scouser you have helped me in the past and am in desperate need of your skills again please. i got a starview box and it has totally crashed, first the screen went blake but had sound and now all has gone and the lcd on the front is displaying the number 6. any idea what this means and do you know how to fix it ? i hope you do and await your reply anxiously. will i get a reply in my inbox ? hope you can help.

• ASH124 (14 Jun 2008 19:33)

  its ash124 you jst replied to my quest...plz help......thx for response,i have pluged one end of thr TV cable into ntl tv socket on the wall and other onto thebox super input socket behind.I did exactly the same way my mate has done.but no signal..........please help wat else i got to do.plz

• ASH124 (14 Jun 2008 19:56)

  thanks for repling......please help me......ash124

• leevines (18 Jun 2008 9:26)

  hi please can u help ive got a cl**e starview box my server is tele**** and im in the west midlands
  ive got no signal on some channels no picture only sound on some channels and on some other channels the pic is all broken up
  ive tried re-installing the channels, turning the box off at the wall and entering the code again but nothing
  please could you help me as i dont know what else to try
  leevines

• leevines (18 Jun 2008 9:27)

  hi please can u help ive got a cl**e starview box my server is tele**** and im in the west midlands
  ive got no signal on some channels no picture only sound on some channels and on some other channels the pic is all broken up
  ive tried re-installing the channels, turning the box off at the wall and entering the code again but nothing
  please could you help me as i dont know what else to try
  leevines

• xcrypto (23 Jun 2008 15:03)

  Hi sc0user, I have Kein System and have tried everything but just cannot connect to my nokia dbox to reflash. Have null modem cable, crossover cable, IFA and even tried Hyper Terminal but cannot connect to DBOX.

• xcrypto (23 Jun 2008 15:04)

  Hi sc0user, I have Kein System and have tried everything but just cannot connect to my nokia dbox to reflash. Have null modem cable, crossover cable, IFA and even tried Hyper Terminal but cannot connect to DBOX. Any Chance you could help me out? I've followed dbox for dummies every word - no go... help please

• sewsunker (24 Jun 2008 13:53)

  Hi mate just wanted to know if you would get Sky Three on the starview box in liverpool TW?

• weeally (24 Jun 2008 14:06)

  Hi scOuser can you help Iwent to check codes and pressed the wrong buttons and have lost provider name TW above the codes and cant get it back can you please help thanks weeally

• sc0user (24 Jun 2008 18:29)

  xcrypto have a look at the Dbox threads.
  sewsunker there are no Sly channels on VM.
  weally press menu, type 1570 on remote and press default key, this will get your provider ID back.

• ioannes (26 Jun 2008 16:28)

  Hey scouser in a tread you said pm mainanm for info on geting a eurovox i tryd just cant find any1 by that nick could you get us in conntact wit him plz

• sc0user (26 Jun 2008 20:05)

  Are you in the UK or Ireland?

• sewsunker (27 Jun 2008 16:53)

  ta

• zubairhak (30 Jun 2008 7:58)

  hi there!
  
  i was hoping you can answer a question of mine... is the eurovox box connection analog or digital? wen i rang customer services at virgin they said i have an anolog tv package, but im sure im connecting via a coaxial cable (digital). and if i am on analog then can i still use the eurovox box if i upgrade to digital with virgin. im thinking of upgrading to digital with virgin, getting the v+ box and putting a splitter at the primary source so that i can use my eurovox box too! thankyou for your help...

• stevieg8 (30 Jun 2008 10:11)

  hi scouser, do you know what frequency lfc tv is on for c***rus (not N*L) ireland please?

• deysb (02 Jul 2008 10:08)

  alright fella, do you know of any other good sites to get the imfomation i need. I cant seem to get it at afterdawn anymore? ;-/

• joanne72 (03 Jul 2008 5:47)

  hi a friend has recomended u please could you help me im trying to flash my eurovox max box i bought leads n tried yesterday but no idea what to do really could you talk me through it im with vir*** ta. jo...

• sc0user (03 Jul 2008 18:54)

  Who is your friend :) Have a look here [ link ]

• damienc (06 Jul 2008 10:49)

  hi can you please help me my eurovox max has stopped working i got up this mourning a message came on my tv saying your box has a fault return to seller do not attempt to re program, please help

• sc0user (06 Jul 2008 17:03)

  It needs to be jtagged look around the forum lots of info.

• maddaff (09 Jul 2008 6:55)

  hi scOuser can you help me please all the good channels on my eurovox max box have stoped i,v done a powerscan but it just say codes being updated any ideas whats up with it

• sc0user (09 Jul 2008 11:09)

  Post in the main forum and I will have a look, easier for me there.

• swally29 (10 Jul 2008 12:02)

  Hi Scouser,
  
  I put in my new codes yesterday but my Dbox is not saving them, have you any idea how I overcome this please?
  
  Swally

• jackill (10 Jul 2008 12:29)

  scouser will you look at me new post in dvb please mate cant find what firmware i need

• jackill (10 Jul 2008 14:37)

  scouse after coming stuck here mate

• sc0user (10 Jul 2008 19:40)

  Swally FTP over new ROM files or reflash with an AU image.
  
  Jack I have answered you.

• rattuss (11 Jul 2008 13:42)

  scouser can you get back to me about scard card. cheers

• alanbq (18 Jul 2008 17:02)

  how and were do i get software to flash dv3 please

• menace404 (20 Jul 2008 8:19)

  scouser, from reading alot of forum posts i feel you might be able to advise me. I called chorus in to fit mmds in my house yesterday but the engineer said the signal was too low...ie i was able to pick up a signal of strength 58 dbm from the local transmitter where as i need a 70 dbm minimum so he left without fitting it. Im just wondering if there is an all in one set that i can purchase on satandcable.com that will pick up a good signal and give me a clear picture. I live in cloyne co.cork and I have my 'box-t' ready to go and everything

• RCO2000 (22 Jul 2008 15:36)

  HELLO SC0USER, JUST A QUICK ONE - I MANAGE A APARTMENT COMPLEX (12 APARTMENTS) & had AN N*L ENGINEER INSTALLING A N*L SYSTEM IN ONE OF THEM. (I ALREADY HAVE A EUROVOX MAX V 2008 & I WAS NOT GOING TO TELL HIM EITHER). ANYWAY, HE WAS TELLING ME THAT THERE ARE A LOT OF DODGY BOXES OUT THERE (I PLAYED DUMB) & SAID THAT N*L ARE ABOUT TO CUT OFF ALL THESE PIRATES AS IT IS COSTING THEM MILLIONS. IN LIAISON WITH NIAGRA, THEY HAVE FOUND A WAY OF BLOCKING THE EUROVOX & OTHER DODGY BOXES .THEY WILL BE ISSUING ANY CUSTOMERS WITH OLD N*L BOXES WITH NEW CARDS & ALL THE RECENT INSTALLATIONS HAVE BOXES THAT WILL NOT NEED THE NEW CARDS. HE WAS VERY CONFIDENT THAT THIS WAS GOING TO PUT US OUT OF BUSINESS & BACK IN THEIR HANDS. WHAT DO YOU THINK - ARE THEY ACTUALLY CAPABLE OF DOING THIS? TKS - UR A LEGEND.

• sc0user (23 Jul 2008 13:39)

  Couldnt miss your post :) I have answered these questions so many times its basically all down to yes they can do it, when is another thing. AND if they do how long will it take to get things back on line. N** & Kuldelski are always looking at new methods, so are other people on the opposite side of the fence :)

• DELLBUY (23 Jul 2008 18:06)

  scOuser
  How are you keeping
  Im having a big problem with the Box no matter what software i use it keeps cutting out after a few minutes im
  just wondering do i need to jTag . i dont see anything wrong with the inside nothing burnt out. The screen cuts out and no power
  then back on and no picture just green pixels breaking up and maybe just 1 line on digital screen or a number 6
  any advice would be great
  Thanks
  Dellbuy

• sc0user (23 Jul 2008 18:23)

  Does sound like a cap problem, is it still under warranty?

• DELLBUY (23 Jul 2008 20:35)

  no but any ideas what to do or is it worth fixing
  and what is a cap
  Thanks
  Dellbuy

• sc0user (24 Jul 2008 10:44)

  Open the box once its not under warranty and have a look on the PSU board, where the power lead comes in. You will see a load of capacitors with silver tops, see if any of these are bulging or blown. If its the C11 cap it will only take a few minutes to fix and will cost about a quid.

• kc096pic (24 Jul 2008 12:59)

  scouser you seemed gend up can you help i got a replay box not lite i cannot get 910 firmware into it when it does go in all i get on is a red light and after 1hr i switch it off plz if you could

• sc0user (24 Jul 2008 17:45)

  Your answer is here in this thread [ link ] if you cant find it, post your query there.

• DELLBUY (24 Jul 2008 17:53)

  scOuser
  Thanks ill try that now and let you know i hope it is
  Dellbuy

• DELLBUY (25 Jul 2008 7:08)

  just tried that all seems ok so i tried loading different softwares but it keeps failing and after 6/7 times it works then back to
  normal with screen going into freeze mode and the breaking up into mad screen and just one digit showing
  and when i turn on/off no joy but 2nd time ok and back to normal for few mins
  any other solutions
  Thanks
  Dellbuy

• sc0user (26 Jul 2008 19:45)

  Dell where are you?

• aaron323I (27 Jul 2008 15:05)

  Hello
  I would be really grateful is anyone can help me. I have just bought a Eurovox ex5000 PVR. It came with FTA installed only and I have tried to install the software I need to enable me to access all channels (Version 1.1). However it still says that version 1.0 is installed but the date has changed to 1.1 software date. I also have an issue now where the signal quality is only at 8%. I have tried a new cable and that has made no difference - the Virgin box still works fine and it is the only cable in the house.
  I am really confused!!! PLEASE HELP MEEEEEEEEEE!

• sc0user (27 Jul 2008 17:20)

  I answered you on the forum.

• scandalou (27 Jul 2008 19:44)

  souse mate...in one of your previous forum threads,you've told people not to buy from cableandsat?is that still true and why?

• DELLBUY (28 Jul 2008 16:22)

  scOuser
  Im in the sunny south east IRELAND

• sc0user (29 Jul 2008 12:42)

  Dell sorry not down your neck of the woods :(

• DELLBUY (29 Jul 2008 15:09)

  no bother
  thanks anyway

• sc0user (30 Jul 2008 12:06)

  bosco I had to delete your post as it had your phone number on it, (you really dont want that in here), and I did answer you on the forum ;)

• janined (01 Aug 2008 12:36)

  hiya sc0use mate i spoke to you yesterday about the eurovox max. now me boyfriend just bought one and it arrived yesterday but its the updated version of mine and i have set the box up and all the channels are there but you know usually when you go in to the menu and you can either press the yellow to input code data or you can go in the languages and do 1968... well i have tried that on this new box and nothing comes up so i can dis scramble the channels ... do you have any ideas on how these new boxes work to get the codes in, ... im aware i cant talk about them on the forum now hence the pm shout
  kind regards
  jen

• sc0user (01 Aug 2008 19:43)

  If its a Eurovox EX5000 you need to flash it with firmware 1.1a for the Eurovox PVR. You will find it in Eamos.

• Tonks71 (03 Aug 2008 11:29)

  Hi scouser,i've got a eurovox max v that works at my mates house picks up all the channels using the VM frequency.But i'm on N*L and when i put the frequency in for N*L and do a scan it doesnt pick up any channels could you help me

• rubbereye (04 Aug 2008 10:06)

  Hi sc0user do you have any idea where I could get a schematic for maxv psu as I have a burnt resistor (r23) and cant identify it?.

• redrobbie (10 Aug 2008 18:36)

  Hi Scouser, only signed up have a eurovox tx live in mullingar Ireland and having major signal problems I think. Screen freezing, sometimes going green and then boot comes up on the box and its like it reboots itself. Have the baic chorus package...ever heard of it mate? Robbie and Torres to torment them all this season.

• Lfc08 (11 Aug 2008 6:08)

  I have just got a starview box. I have tried to install it on ntl,chorus,and chorus cork. But every one failed, I have tried frequency numbers iswell. Is there any frequencys for the nurney, Kildare area. Any help would be apperciated as iam starting to get angry with it.

• pete3572 (13 Aug 2008 13:09)

  Hi scouser, replying to your comment from this thread....
  [ link ]
  lcd display shows channel number when i try to reflash or turn the box on.
  many thanks

• tooloud (13 Aug 2008 13:51)

  hi scouser
  looks like ur the man to speak to
  i spent far too long sorting my channels and lost the list in one fail swoop can you provide a cdf for east london ex C*w cheers in anticipation

• STE8555 (14 Aug 2008 14:04)

  Hi scouser , I am hoping you can help me out . I have a eurovox max and it has been fine for 9 months. Last week on sports i got no signal message. Do you think the signal from virgin is weak or do i need to do something with my box. I have had it flashed to update on its own and it has been fine up till now.
  I am in merseyside . What frequency shoul i scan on . Thanks

• sc0user (14 Aug 2008 17:16)

  Folks I have answered most of you in the forum. If not pm me, but I would perfer if you posted on the forum.

• toffee82 (16 Aug 2008 16:35)

  ive been told to msg you mate as you may be able to help with my problem, the thread is [ link ]
  
  Cheers pal

• fatima08 (18 Aug 2008 20:31)

  i ahve this eurovox max 2007, its been not working for like from july, today i tried to fix it but i messed up...its showing no transponder found!....and no channels either..i need help!!

• gigger (24 Aug 2008 14:18)

  i bought the eurovox max 5000 pvr its working away fine only that when i record something on the hard drive it will only let me watch 10 channels... is this right or can i do something about it????

• jay31 (28 Aug 2008 11:30)

  Hi scouser i wonder if you could help me im trying to jtag my starview box i can't get it to finish writing i keep getting the same error Write Flash ADR[7FE00000] LEN[00200000] : Please Wait...
  Load Data RAM Fail
  Write Flash END
  any help would be great thanks

• phasetest (28 Aug 2008 16:37)

  hi scouser. not sure if this is the correct way to ask you a question but i just got ex5000 pvr . have all stations working and put in the hard drive but nothing happens. message says hardrive full or not installed. any ideas?

• toomyling (29 Aug 2008 8:07)

  I will be attaching an Eurovox EX5000PVR when I can get a driver installed to my USB2.0SER. I don't seem to be having much luck. Have you any other suggestions?
  
  Thanks

• zubali (29 Aug 2008 14:01)

  still stuck wid that distortion crap did the powerscan but no luck!

• cheeko08 (01 Sep 2008 9:26)

  alright scouser i was wondering if you could help me
  just bought the starview 3 the super box but it doesnt seem to be working like on everything it says its failed do i need to download some software or sutton im from liverpool meself mate if not could u come round and try and sort it for us thanks get back to us please
  me hotmail is davidwharton549@hotmail.com

• IanMc08 (01 Sep 2008 12:53)

  Yo Scouse - Up da pool -
  i have a Euro Vox Max-V 2008.... i am just wondering if there will be still firmware updates and channel files for this box in the future, or is this box being fased out and soon to become usless??.
  Any advice or help is greatly appreciated
  
  Cheers Matey.... ;)

• mylesy (01 Sep 2008 15:51)

  Howdy Scouse,
  Can I have your thoughts on the following as you are good at this... I have a st*rview 1 (not a clone) on N*L and was losing UTV, MTV etc, so I went for a reset as follows... Menu, Fac Set, code 1668, OK, turn off for min, press OK to Language, select english, select CC, auto scan, exit to menu, press 1570 EMU to ON exit, exit, exit.
  
  It will do all of the above but the
  Problem is it won't go back to the channel listing and keeps coming back to the Language menu. I have so far repeated the above proceedure 5 times, switch box on and off, tried same with 0000 code etc, it will go through all the motions alright, but all ends up at the language menu stuck on the screen. Can you help? My kids are killing me!
  Regards, Mylesy

• Trazzer (01 Sep 2008 17:41)

  How's it going Scouser
  I just got in the The Box super, but the problem is i can't get LTV in. have auto scanned three times, any tips. its mmds system
  ta
  trazzer

• sc0user (03 Sep 2008 19:59)

  Hi all apologies but I seldom check my shout box, if you all post on the forum I or others will be more than happy to help out :)

• martina55 (04 Sep 2008 7:29)

  Hi there, i wondering if you can help me. my n*L box that was 0 pened isn't working anymore. only able to see the basic channels. u'r help is most appreciated. PM please, am desperate! h.martina55@yahoo.com

• HiTeck (04 Sep 2008 17:36)

  Cheers for the coment Sc0user about my kids :) , I see what you mean about your shoutbox and as for my page at least I have at a couple of decent pics where as you have none. Lol.

• sc0user (04 Sep 2008 18:42)

  LOL touche :) I was asking for that. BTW I tidied up my shout box had to give up halfway through :)

• molywoo3 (06 Sep 2008 19:33)

  hi scouser, i want a box that wont need reflashing all the time. and can you recommend a good dealer. thanks. tom

• HiTeck (08 Sep 2008 10:11)

  Thanks for the advice regarding PM.

• anto1969 (09 Sep 2008 17:22)

  hi Scouser how are you sorry for disturbing your hols did'nt realise you were away, hope you had agood one anyway.;-)

• sc0user (09 Sep 2008 18:36)

  @ HiTeck no problem anytime ;)
  
  @anto you never disturb me :) And yep had a good one indeed thanks.

• HiTeck (13 Sep 2008 14:06)

  Yes before you get started I know we lost. congrats. :(
  
  BTW did you get my PM?

• sc0user (16 Sep 2008 7:32)

  Sorry mate I seldom check in here as you now know I got the pm. Thanks for the congrats I never kick a man when hes down :)

• pudzyryan (18 Sep 2008 16:25)

  hi. scOuser me again. i was looking at a site on sagem ITD 60 ch from about a year ago . these boxes are currently being used by chorus . i was wondering can i download firmware on to it,

• LEEKOP (19 Sep 2008 11:48)

  any idea how to access emu on pvr 5000 eurovox

• davenicky (20 Sep 2008 12:33)

  hello lad wonderin if you can help just got a box super from that place by the albe*t d*ck sat and c*bl*s supplys any way i ogt installed it got plenty ov channels but wen i put 1570 in nothin happens . now wen i got it the kid said i had to go on and do*nload the s*oftwer. could you giude me from here by any chance lad system info

• davenicky (20 Sep 2008 12:39)

  hello lad wonderin if you can help just got a box super from that place by the albe*t d*ck sat and c*bl*s supplys any way i ogt installed it got plenty ov channels but wen i put 1570 in nothin happens . now wen i got it the kid said i had to go on and do*nload the s*oftwer. could you giude me from here by any chance lad system info

• curryman4 (20 Sep 2008 17:01)

  sc0user can you help. i have flashed a few eurovox's. what i need to know is how to tell which starview box i have is there much in the difference in the models.
  didnt realise you dont check here that often ill post in the hope i dont get a slap on the wrist

• davenicky (22 Sep 2008 16:11)

  scouse can ye help me please lad , ive a cloned starview , could ye tell me if the is any downloads and if so were could i get it from if so

• SHAZ20002 (24 Sep 2008 18:03)

  hi can you help me
  got eurovox ex5000 pvr but can not get bbc1 bbc2 itv and chanel 4
  thanks

• medic2123 (26 Sep 2008 6:46)

  hi scoser wonder if you could help me got a kryptview machine cannot get the lfc channel have tried everything scanning etc have you any idea how to do it manually thanks mate

• medic2123 (26 Sep 2008 6:46)

  hi scouser wonder if you could help me got a kryptview machine cannot get the lfc channel have tried everything scanning etc have you any idea how to do it manually thanks mate

• bambamdf (27 Sep 2008 7:44)

  i dont seem to be able to find cap c21? on starview box???

• wexjim (29 Sep 2008 12:44)

  hi, been looking at a lot of posts and being new to this feel you maybe the man to help i am living outside wexford town and have ch**us they have a metal antenna thing on the wall the cable comes into the room into a little black box which is plugged in another cable goes from this to a sagem decoder which on the label underneath says idt which sort of box would i need? and how easy is it to get them working also if ch**us changed frequencies/encrptions would the box update itself
  any advice/help would be appreciated
  thanks

• quack123 (30 Sep 2008 11:32)

  hi bud can you help me ive got a starview 2 box and no software if you could help id be much appreciated my email address is quackapack@hotmail.co.uk thanks again

• johnno197 (01 Oct 2008 14:49)

  hi m8, cant get sound on s*y sports 2 on my eurovox tx, picture there but breaks up a bit. says freq. is 338mhz. living in Kerry.

• jojo11 (02 Oct 2008 12:37)

  Hi Scouser
  
  Can you help me ive installed eurovox box 1 week ago and now lost signal what can I do thanks

• slanepaul (04 Oct 2008 8:34)

  Hi Scouser, dont want to multi thread, so if you can help that would be gret,Ive just got a eurovox with evx-tx 11-11-07 i see the file in eamos library but dont know what to do with it, can you please tell me how to flash it, thanks again mate

• gigger (05 Oct 2008 6:25)

  sorry for asking you but do you know if i can get codes for arsenal tv for eurovox 500 pvr and eurovox 2008???

• Bigb_319 (05 Oct 2008 17:59)

  Hey Scouser - im trying to set up the Eurovox Max V 2008, but all the channels are coming up scrambled, my provider is V.Media. Could you kindly tell me what im doing wrong?? Thank you

• Bigb_319 (05 Oct 2008 18:00)

  Hey Scouser - im trying to set up the Eurovox Max V 2008, but all the channels are coming up scrambled, my provider is V.Media. Could you kindly tell me what im doing wrong?? Thank you

• irish90 (06 Oct 2008 18:10)

  just bought a eurovox 2008.....my mate has the starview box 2 and has more channels.......is it possible to get the same amount of channels on eurovox?? thanks

• slanepaul (07 Oct 2008 14:02)

  Hi Scouser, can you help please i flashed the bpx and it seemd to work, thanks, i tired to follow hi techs guide to scanning channels but all i see is a menu with installation, user setup,factory setting, can you guide me the rest of the way please

• humpty (09 Oct 2008 16:05)

  hi sc0user
  a quick question for you i just rescaned my box and i have a channel that says u are not using the correct box what does it mean

• sully11 (15 Oct 2008 8:57)

  hi scouser,
  i live in county kildare, i have chorus, i have the eurovox max v 2008, i used it the whole time in my parents house which is chorus aswell, but i recently moved to a new house, so i got chorus installed, but the connections are different, there is now a spiltter box, the connection for the wall to the splitter is an ANT wire, and then there is a wire (tv) to the ntl box, what do i do ???

• jayme82 (15 Oct 2008 12:40)

  hello mate iv just got an eurovox ex5000 pvr and im looking for the symbol rate for teeside area if you could please help

• madman197 (18 Oct 2008 11:48)

  hey scouser hope u can help after lots of nagging from mrs i bought a dbox on ebay but cant get any channels on it im in west yorkshire and box is from derby. seller said it was working but she didnt set it up and cant get hold of person that did.hope u can help me as im very close to throwing in bin and telling mrs to forget it.

• madman197 (18 Oct 2008 11:51)

  sorry forgot u can mai me madman1970@hotmail.co.uk if that is any easier.

• sewsunker (19 Oct 2008 18:26)

  HI scouser. do u know if there is a box to receive in High Def? Many thanks

• gilly44 (21 Oct 2008 3:09)

  hello i have losts setanta sport 1 can u help me

• tooloud (21 Oct 2008 14:07)

  alright scouser highlights ex c* east london lost channels 6.30 tonight son starview no channels neighbour starview no channels this area or wider problem CHEERS

• Evastar (31 Oct 2008 13:01)

  Happy halloween!
  
  
  

• anto1969 (31 Oct 2008 13:52)

  Hi scouser long time no post!LOL happy halloween to you and yours;)
  
  

• jackill (01 Nov 2008 14:02)

  scouser wuld you have a look at the thread i posted in pvr devices bout no update
  
  go on th reds good strt tonight

• EoinT (03 Nov 2008 17:19)

  Hi Scouser,
  
  Am new to this, have just moved house and got connected to Ch***s. Have just got the Box which I know works with N*L in Dublin. But I am getting NO signal when I connect it with Ch***s in Laois (near Kildare) 50 miles from Dublin. Is there anything I can do to get a signal or can you recommend a box that will work? I am connected by cable NOT MMDS. The system details are API ver:4.51.e_E. Boot ver:7.0 9 Jul 2007. Any suggestions you can provide would really be appreciated.
  
  Thanks in advance, EoinT

• BigKnack (04 Nov 2008 10:35)

  Hi Scouser, where would I get the latest image that will work well on NT1 in Galway?
  
  I have the lacky pro image and it can scan for all uk channels, but it doesn't have the NT1 scan on it.
  
  Do you have the link for the latest and greatest image for the DBox 2 in ireland?

• BigKnack (04 Nov 2008 10:44)

  Hi Scouser, where would I get the latest image that will work well on NT1 in Galway?
  
  I have the lacky pro image and it can scan for all uk channels, but it doesn't have the NT1 scan on it.
  
  Do you have the link for the latest and greatest image for the DBox 2 in ireland?

• netguy40 (04 Nov 2008 19:49)

  hi scouser living in portlaoise co laoise ireland have cable in house chorus i think well upc what ever connected starview old box and couldnt change cable provider to chorus only had ntl tw om and something else did manual scan changed 6887 to 6875 did freq scan some i found on site got some channels not all with the new boxes like eurovox will it have chours provider on it and will it scan as old starview didnt or do u have all the freq new ones as i think lot old ones here some music channels missing and porn and some orther channels too any help needed thanks

• matty1984 (06 Nov 2008 11:22)

  Hi scouser just joined to ask you a question??
  Have the starview box and was wondering can i get itv4 on it as the grand slam of darts is coming up and is on that channel, and if ya can get it what is the frequencie im from dublin...
  Thanks a million mate

• shep2 (06 Nov 2008 14:38)

  hi scouser, just wondering i have box super star view3, i can get into secret menu to turn on emu, but its not finding any channels any help please? does it matter that i live in country? i have chorus

• matt555f (06 Nov 2008 17:52)

  Hi Scouser, Is there a thread on getting RTE TV3 etc on the box with NTL?, have everything else - thanks

• gevans82 (10 Nov 2008 7:04)

  Hi Scouser do you know how to setup a sat system and can you recommend one?
  
  Cheers
  
  Gareth

• AlDela (20 Nov 2008 18:48)

  Originally posted by che27: Hi all.
  Im having simalar problem meself.When i switch box on Boot appears on display.Then 02 but i dont get the On as before.Box just goes blank.
  Ive tried the chdl fix,download says ok,but still only getting Boot/02 then box switches off.
  Any ideas lads and lassies?
  Scouser help!!
  
  Hi Guys I'm a newbie, I have the exact same problem did anyone ever solve this problem, I cant get the box to display Boot/02 & ON. Box just goes blank after 02.
  Thanx
  
  Sorry man I dont know who else to ask this question, my problem is the exact same as che27.
  
  You said 'Here is the fix for that particular error on the TX.' as an answer to a post on WizardMods.co.uk
  
  Link: [ link ]
  
  If you cant help me no-one can.
  
  Thank you for at least trying.

• bobnew (22 Nov 2008 11:50)

  hi
  i have purchased a eurovox mav v it is in a whit/light blue box does anyone know where i can get software for this box. i have the software for what is known as eurovox black but when i try and load it says it is unsuitable for the box i have. can you help in anyway

• Tanya48b (26 Nov 2008 14:26)

  hi sorry to bother u i was woundering if you could help me with my pvr box i lost all my channles last night and dont know how to get them back on :( i see your names in the forms lots so i guess you know wot your talking about :) it would be of great help Thanks .. T48b

• Tanya48b (26 Nov 2008 14:26)

  hi sorry to bother u i was woundering if you could help me with my pvr box i lost all my channles last night and dont know how to get them back on :( i see your names in the forms lots so i guess you know wot your talking about :) it would be of great help Thanks .. T48b

• KTMGAZ (27 Nov 2008 14:25)

  Hi mate you seem to be well recommended on here , my box has gone off. do you know where I can get the codes so I can manually input the codes in for the time being

• muchya10 (27 Nov 2008 17:49)

  Hello M8, Do u know anything about what t*west have been up to today. Tried factory reset on starview a few times with no joy. the lad over the road is having trouble too. Any ideas or is it cc work just in my area?

• kerry2006 (28 Nov 2008 5:15)

  hi there.dont know if u can help me ,but i 'm new to this i have a eurovox max v and live in the west midlands i have been on the big key and got the key codes but im not sure what code i have to put in the first 4 digits at the top and which code to use .
  can you please help me i have been reading the feed but they are all babbling lol
  thanks
  kerry

• andydonn1 (28 Nov 2008 9:27)

  hey mate has your box gone off i got starview 3 and live in west derby if you could help me would be gratefull

• snapdrago (28 Nov 2008 10:30)

  you are prob bored with it by now but HELP!! Any ideas where I can find codes or what ever to sort my Digivox XL??

• Wuff1 (28 Nov 2008 12:42)

  I am having the same trouble in Tyne Tees area everything has gone off last night , but I need an idiots guide to put it right, if it can be put right. Please help

• jack143 (28 Nov 2008 13:05)

  hi
  need help i downloded the tcb toolbar in past for starview keys forgot where from.then my comp crashed and lost all the data where can i download that again please
  thanks
  jack

• bailes200 (28 Nov 2008 13:14)

  Ive got the ex1000sl box and cannot get any channels can anyone help me as Im proper frustrated now.

• marko2312 (28 Nov 2008 19:46)

  orite scouser marko2312 here could you help with secret menu activation forgot how its been that long since ive needed it would be a great help euro 2007 box

• podgiekop (28 Nov 2008 19:54)

  hi scouse got ddigital box mate r the keys same as starview or am i lookin wrong direction cheers mate

• kosh1904 (29 Nov 2008 5:01)

  hi sc0user - thanks for you Eamos section. Theres some good stuff in there for the dbox. I'm sure your're aware... any advice on which image to use to bring back all my working stuff???

• MikeyboyT (29 Nov 2008 7:04)

  Hi Sc0use, i too live in the liverpool area, noticed on one post you say you have got a box working. Have you got a nagravision decoder as a mate of mine has said it is the way the nagravision intercepts the cable network which is causing the national crisis LOL. Is this the same info you have gathered from the forum messages you have recieved.

• BEX15 (29 Nov 2008 9:17)

  Hi mate sorry for asking but , my box has gone off. do you know where I can get the codes so I can manually input the codes in for the time being

• pie8er (29 Nov 2008 15:40)

  any chance of the codes/firmware for the eurovox maxV. thanks mate

• towsey (30 Nov 2008 9:52)

  where can i get manual updates for the starview 3

• surraj985 (30 Nov 2008 10:27)

  were can i get the digital uploader frm

• joecardif (30 Nov 2008 14:27)

  Hi scouser how you doing buddy. I need your help i might be missing it but what download do i need for the star view super 3.
  
  thanks in adavance and be gentle with my limited and fragile i.q

• spex2k (30 Nov 2008 15:03)

  hi scouser. i heard you the one to turn to for problems the box pvr. i have the secdonary password in parental control do u know how to get it back

• spex2k (30 Nov 2008 15:06)

  sorry scouser just rememebered it 's jbvideo i need. sorry

• girv39 (01 Dec 2008 14:49)

  hey scouser..help me out mate..since last thursday my box super hasnt worked..tried to download the link but for some reason my pc wont av it..please can u get back to me with simple to do instructions to get my box working..have tried the usual ways with emu and default button etc..help a fellow scouser and red out please nice 1

• zomarab (01 Dec 2008 17:16)

  Hi scouser.......just like mos of the people i need help with the starview3 box.....plz help and thank you.

• MadMarkus (02 Dec 2008 17:37)

  scouser all forums i look at seem to be closed, this is the link to the new eurovox maxv flash it works dont know if you guys have it yet [ link ]
  
  have fun mark

• rst1 (03 Dec 2008 6:41)

  hi scouser thought i would let you know eurovox v max and digivox have gone down again this morning in the midlands .had to manually input the codes again.rich

• kaur122 (04 Dec 2008 12:59)

  I have downloaded new fix FIXED DD 281108 for ddigital and still cannot get any chanaal. I couldn't turn EMU on. I tried 2580 but nothing happend. Can you help me please.

• kaur122 (04 Dec 2008 12:59)

  I have downloaded new fix FIXED DD 281108 for ddigital and still cannot get any chanaal. I couldn't turn EMU on. I tried 2580 but nothing happend. Can you help me please.

• apaz69 (05 Dec 2008 12:25)

  apart from supporting the wrong team, you seem to be de Man when it comes to firmware updates. have looked at updates listed but cant see one for the maxv 08. Is there such a beast?
  Cheers,

• vin030468 (05 Dec 2008 16:09)

  Hi Scouser,
  
  you are a genius; need help; FAV button not working anymore after the upload of new firmware.
  
  Where can I get the cdf file from?

• scott625 (06 Dec 2008 3:20)

  hi scouser, wondered if you could help with my problem regarding the box PVR, iv started a thread but had no reply as of yet, any advice would b gr8 cheers

• damb1 (06 Dec 2008 10:40)

  Hey scouser!
  I hav a eurovox tx.Im in ballinasloe(east galway).do u know whats my nearest mmds transmitter?
  Will this work?
  [ link ]
  The house beside me has a mesh aerial.
  Cheers

• tracyjane (07 Dec 2008 4:41)

  hi scouser its tracy i need help to go through and how to update my firmware for the box starview 2 its ver 4.51e_E boot ver 7.0 i have no clue as what to do at all so could you please help me,

• RizzB (08 Dec 2008 9:21)

  Hey Sc0user u do a great job for the Afterdawn Forum. Just a quick question have you any inside info on a possible fix 4 the box PVR? Thanks. Rafa Benitez ;-)

• adilaslam (10 Dec 2008 13:38)

  hello can u please tell me if a 160gb would fit in my eurovox ex5000

• sc0user (11 Dec 2008 8:50)

  Folks I have now officially retired from my shoutbox, all questions that are worth asking in here are better off on the forum.
  
  Cheers :)

• HiTeck (11 Dec 2008 21:12)

  Wheres the Forum ????

• sc0user (12 Dec 2008 7:20)

  I have officially come out of retirement just to answer that.
  
  It now resides in my inbox :)
  
  Back to shoutbox retirement.

• tomroller (12 Dec 2008 17:37)

  Hi Scouser, new to this, and hope you can help me. is it possible to get free premium channels on a dvb t card on my computer ??????? come on the POOL. tomroller

• tomroller (15 Dec 2008 12:22)

  hi Scouser, New to this site and was wondering can you help me. i'd like to know if you can get codes and premiem channels using a DVB T card on a computer ? posted on the Forum, but no replies.

• tooloud (17 Dec 2008 16:14)

  scouser; i dont know if i broke the rules but i posted this [ link ] it is a link to starview 1 fix i found dont know if it works yet am trying it now if it does work and they ban my post i will post that it works and perhaps you can get it out there somehow ; tooloud

• tooloud (17 Dec 2008 16:14)

  scouser; i dont know if i broke the rules but i posted this [ link ] it is a link to starview 1 fix i found dont know if it works yet am trying it now if it does work and they ban my post i will post that it works and perhaps you can get it out there somehow ; tooloud

• steiny191 (18 Dec 2008 7:58)

  Scouser I need your help big time...I have a digivox silver box ive downloaded the bin file etc as instructed followed the instructions on the tutorial but wen i click on digivox_2007 etc it says damaged file or something....i have tried a million times do u know where i'm going wrong. i've used winrar etc to extract files but its still not working. please help if anyone can its u. thanks
  
  steiny

• lorr (18 Dec 2008 12:39)

  new loader for the box gtr 403.... has no stb can u help pls

• voxhead (18 Dec 2008 14:02)

  hi scouser any ideas where the eurovox forum has gone ??? I used to get mailed any time it updated but when i went to get info about nthell codes today i found it was shut down, any help greatly appreciated. Voxhead

• mikedone (18 Dec 2008 15:32)

  sc0user hi bud can you give me the codes for eurovox
  cant find it anywhere ireland please

• Steveirl (18 Dec 2008 16:31)

  hi scouser sorry to bother you, your getting bombarded here, you might remember me from before, i havent been on in 8 months because everything has been going so smoothly.
  Im on Ch^rus in north county dublin, me like everyone else has this message updating codes.
  anyway you can point me in the direction were i can go about getting the codes so i can manually insert them....I have a Eurovox Black Max V 2008
  
  Once a Red Always a Red YNWL
  
  The sites that DESB posted didnt work more me....page not found.

• Steveirl (18 Dec 2008 16:31)

  hi scouser sorry to bother you, your getting bombarded here, you might remember me from before, i havent been on in 8 months because everything has been going so smoothly.
  Im on Ch^rus in north county dublin, me like everyone else has this message updating codes.
  anyway you can point me in the direction were i can go about getting the codes so i can manually insert them....I have a Eurovox Black Max V 2008
  
  Once a Red Always a Red YNWL
  
  The sites that DESB posted didnt work more me....page not found.

• hottie79 (19 Dec 2008 17:48)

  Hiya just looking for a bit of help here im really new to this just got my box a couple of months ago and i have recently just got a note saying updating codes and it hasnt came on since. im on cho*us n*l and i live in blessington co wicklow the box is a digivox-t. tks a mill

• robbie67 (20 Dec 2008 4:59)

  hi scouser can you tell me if there is there a site just for the sagem dbox thanks

• biscuit23 (20 Dec 2008 9:02)

  Hey all. I flashed my eurovox max 2006 blue box not a clone with the new software and now wont work. the remote switches the power on thats it wont change the channels only swithces the power on I think the new software doesnt work on the irish boxes. Then tried flash the old software that wont work.Hope its not broke. By the wy be liverppol fan need to box working to watch the game. Much appreicated if u can help us.

• SteRicho (20 Dec 2008 9:18)

  Alright mate i have downloaded the crypt star-v15 for my starview 1 and when i try to get the real files out of it for my box it comes up and says the archive is either unknown format or damaged. Sorry about this am new to all this how do i get the real files out of it i have both winrar and winzip and i get the same answer when i try to use both of them. I have tried to download this like 3 different times to see if it would work but it just wont have any of me thanks in advance. ste

• Evastar (21 Dec 2008 18:01)

  Wishing you a a wonderful christmas! :)
  
  xxx
  
  Eva
  
  
  

• sc0user (21 Dec 2008 20:04)

  Thanks Eva and the same to you and your family :) A beautiful picture that we haven't seen in Ireland in a long time.

• amabala (22 Dec 2008 2:08)

  Hi scOuser
  was wondering if you still live in the Pool - if so maybe you could let me know at - basmit@live.co.uk
  Maybe of benefit to us both - cheers and Merry Xmas
  alabama

• pudzyryan (22 Dec 2008 6:45)

  scOuser mate , friend told me to upload software from eurovox tx as bin file ,, edit it with new rom 7 bin and load back to box . he reckons it should work , he has own files for his dreamboxes

• steo46 (22 Dec 2008 19:00)

  Merry xmas mate. just to let you know there is a new site that allows code posting I'm on there quite a lot now. hope to see you there soon. [ link ]
  
  regards Steo46

• anto1969 (22 Dec 2008 19:14)

  merry xmas, have a great time:)
  antoinette,
  
  
  

• Eoghanc (23 Dec 2008 18:46)

  Sc0user my man u helped me out while back, DBox 2 iin Dublin with the latest Blade Xenafan image on it, everything gone due to new rollover thingy, any ideas dude

• binge (23 Dec 2008 18:47)

  hi scouser
  happy xmas just bought me lad a eurovox max v it does not seem to have secret menu tried all the ways in (the 1968 way and the yellow button way nothing happenin) also wen i load the new firmware it send 100% but stops writing on 30% gives a err on the display any help would be great hes looking forward to watchin it in his room. im not new to this but its my first max v do i have to put some thing else on before the loader will work thanx

• noelyf (24 Dec 2008 14:11)

  Sc0user, Best wishes to you & your family & a Happy new year.

• HiTeck (24 Dec 2008 15:18)

  Sc0user, Wishing you and your family a very Merry Christmas and a prosperous New Year!!!.

• sc0user (24 Dec 2008 16:58)

  Cheers Folks and a Merry Xmas and a Happy New Year to you all :) Long year full of good times and bad here but you folks have been the heartbeat of the DVB forum cheers :)

• sewsunker (24 Dec 2008 17:05)

  all da best to u and urs!!!

• ronin2009 (25 Dec 2008 15:02)

  Hey Scouser
  Merry christmas.
  i was wondering if you had a link to the new working image for dublin NT*L x2 nokia?
  the link [ link ] does not seem to work
  any help coulf provide would be great as usual
  thanks again and come on the reds :)
  Paul

• chezzer (26 Dec 2008 15:52)

  hi scouser, can you please advise on the best place to purchase a eurovox ex5000 plz

• flippin_m (28 Dec 2008 14:43)

  Do you have or know where i can get the latest channel dump from for teesside please?? is it the same as hartlepool?

• axxxo (29 Dec 2008 7:07)

  happy crimbo and new year to ya scouse

• Evastar (29 Dec 2008 13:13)

  Only got to read my shoutbox now, could have had a beer in mayo somewhere! lol! ;)
  
  Happy new year!

• anto1969 (30 Dec 2008 20:19)

  
  
  and all the best for 2009 xxx:)

• DesB (31 Dec 2008 6:34)

  Wishing You and Yours A Very Happy New Year !! !

• karljd (31 Dec 2008 12:17)

  happy new year sc0ucer
  

• HiTeck (02 Jan 2009 19:57)

  Happy new year mate, Thanks for everything and all the best for 2009!!!
  
  
  

• sc0user (09 Jan 2009 14:37)

  Apologies a belated Happy New Year to all :)

• lynng (09 Jan 2009 17:38)

  Hi
  Sorry to bother you with this but got one of these boxes...got the hard drive installed...but have trouble recording and also have audio sound on all the time and cant get rid of it driving me nuts!!!! cannot find anything on here to tell me how to get rid of it have tried some manuals but not having much luck
  Sorry i know this is very trivial but for the sake of my sanity i hope you can help
  Glasgow

• ph2kuk (11 Jan 2009 5:06)

  Any chance you could point me to where i can learn how to program a fun card for a pace 4000, I have a infinity usb and software, when it is open it shows three files do I simply replace the flash rom with a hex from the 6in1 240808 ?.if yes wich one for widnes ? Or is there more to it. Please help!
  Thanks
  Paul

• mancred (17 Jan 2009 7:31)

  Posting my name on this site was completely out of order.
  
  You should practice what you preach in future.

• golass (20 Jan 2009 6:44)

  Hello, Scouser. I was having trouble sorting a Eurovox for a friend with no luck at all. However, I found your post: [ link ]
  and it is sorted. Just want to say tanx 'n' Dermot is delighted too his box is working again....(,)**

• oggnogg (21 Jan 2009 15:18)

  Hi m8t not been around just seen your post hope ya had a good xmas and happy new year to u

• anto1969 (21 Jan 2009 19:46)

  
  
  Ah scouser next time your on grafton street playing the fiddle I'll watch out for you and throw something your way :) Thats if I've made enough myself LOL.

• sc0user (22 Jan 2009 9:03)

  @golass no worries but thats an old firmware link how did you get it to work (when I say work I mean AU?).
  
  @Ogg cheers mate good to see you back in town :)
  
  @ Anto if you are paying that much for my fiddle playing you want to see my one man band act LOL :)

• oggnogg (23 Jan 2009 9:34)

  Alright Mate im not back in dublin my mate was having issues in dublin so i told him just to login under my nick to get things sorted.Im thinking about getting a box here in munich im on cable u any ideas on what box best for here and where id get the software for here

• sc0user (26 Jan 2009 8:19)

  Not up on the German side of things Ogg, but give me the providers name and I will see what they are using ;)

• stanman28 (07 Feb 2009 18:40)

  hey hows everyone new at this could really use some help just got nokia dbox2 usin mmds in galway would really appreciate if someone could help me find
  the latest flash as i havent a clue where to get it from please please help thanks

• Evastar (09 Feb 2009 6:48)

  [ link ]

• chippy55 (09 Feb 2009 9:55)

  alrite scouser man was jus wondering which box wud you recconmend to get.the eurovox5100 pvr or the starview 4.and will the any of the eurovox cable boxes work on chorus cable i live in westmeath ireland.which is more reliable box that you dont keep loseing channels,unscramle ect. and do you get more channels on either one of des boxes?if you cud answer des questions dat wud be great.

• hynzyem (13 Feb 2009 8:40)

  hi scouser im gettin chorus digital in kildare ireland, comin in off road not ariel. was wondering wat type of box i should get, like starview dreamcatcher?? any help welcomed thanks

• Kparzo (13 Feb 2009 15:08)

  sc0user,
  Can you help?
  I am having problems with my eurovox max v. It has been working fine until recently when I switch it on the only response I get is the redstandby light flashing on and off continuously. I have tried to re-flash but cant get it to respond and I have aslo tried the reset button on the board inside but no joy.

• gardac8 (18 Feb 2009 22:52)

  hey scouser, could u please pm me about fun cards for nthell pace boxes, i think the box i'm using already had one, but most off the channels have gone off!!! cheers!!!

• kungbo (19 Feb 2009 6:36)

  can any1 help hav ex1000sl, its just not tuning in, hav spent days trying but nothing, i really need a simple step by step guide as not too clever, any help welcome, (im with virgin ).

• dazzyg (21 Feb 2009 9:35)

  can u help me pls???
  Where can i get a list of channel frequencies for the eurovox max v.
  I live in Warrington, Cheshire.
  I would appreciate it if someone could send me a link.
  Many Thanks.

• adam83 (28 Feb 2009 9:06)

  hi.i need some help. i got a starview 4 recently a mate set it up with software and tuned it in for me it worked perfectly in his house.i'm on n#l ireland and when i got it home i had no joy.the reason is i have a upc box in my house. the cable goes into the upc box with a scart from that to the telly. i put the cable into the box just say's no signal even when it goes into telly directly still no signal. for some reason it has to go through the upc box to pick up a signal.ive tried everything but no joy. is there anyone that is familiar with this. would appreciate any help

• St00 (03 Mar 2009 6:05)

  hi. My starview4 LCD is displaying 8882 and a blank tv screen. You kindly responded to my post about it, but didn't go on to say what you thought might be the problem. If you've got any information about this I'd be really grateful to hear about it! Cheers -St00

• rayrayy (03 Mar 2009 17:39)

  hi ,ive bought a blue ev max genuine,and no matter what firmware i try i get the channels up.it picks up transponders,but no channels,ive tried cdf,that brings the name of the channels but says no signal,the feed is good,i have put firmware on many ev so im not daft.please give me advice

• diver12 (10 Mar 2009 16:05)

  sc0user can help me with a pace n** box can you give me any advice on this

• sharonnum (13 Mar 2009 11:16)

  help please ,i just bought THE BOX and i have it pluged in at the moment with usb to cable and the box is on standbye can u help me put in the firmware or what ever its called please sharon

• hopper63 (13 Mar 2009 13:58)

  hi scouser just noticed my man utd and my 3 x rated channels are scrambled any info on getting them back on have a eurovox did an autoscan but no luck living in dublin 7 cheers

• louisms (17 Mar 2009 17:26)

  is this the end Scouser?

• slanepaul (19 Mar 2009 17:48)

  Hi scouser my eurovox tx has been scrambled,i tried re flashing it but it wont download the file, can you help please

• Lethal_B (01 Apr 2009 11:31)

  liverpool.. shocking...

• sc0user (01 Apr 2009 16:55)

  .... at times

• faolteam (01 Apr 2009 17:00)

  scouser my friend what would u do, would u buy the new krypt box, and can u see a cure coming soon

• sc0user (01 Apr 2009 17:12)

  I think I have given my views of that on the forum mate. At the end of the day if you want to take a gamble on the Kryptview its up to you, as you wont get a better supported box. However that doesn't guarantee that you will get a Nagra 3 fix either as it hasn't been broken since its introduction.

• faolteam (01 Apr 2009 20:06)

  so basically were f???ed
  nagra 3 has closed us down
  
  who can get a fix?

• flateric8 (02 Apr 2009 10:07)

  u seem to be the expert, this magra 3 thing has started in ireland, is it being introduced to the uk? and if so is northern ireland considered uk or ireland by v*gin ?
  
  any help appreciated

• sc0user (02 Apr 2009 14:12)

  @ faolteam, time will tell.
  
  @ flateric8 the UK is unaffected and will remain so for now and that includes Northern Ireland.

• Jimout (08 Apr 2009 4:28)

  ScOuser,
  
  Have you tried the Evolution A750, The Latest Box From Kryptview. I was told by a supplier that it will support / decode NAGRA 3 ?
  
  Jim

• fergal05 (18 Apr 2009 16:08)

  anyone know was the kryptview hit tonight in dublin

• markb1 (20 Apr 2009 15:35)

  wondering can you help a dope here.
  put new codes into the starview box because i was told they would get all the channels back.
  
  obviously knocked everything out,was wondering is that the box fucked completely or can i put in the existing codes and get what ever channels i did have back?

• SV4USB (21 Apr 2009 17:24)

  Hi Scouser, I have learned many things from these forums and have flashed a Starview 2 before.
  
  Im at the end of my tether! I have a starview 2 box which has the right amount of slots on the top and the back/insides look correct for a genuine box.
  I have firmware v4.55e and boot version 7.00 but for some strange reason I cannot get it to pick up any channels, it found them the first time I searched but since i did a factory reset ..... NOTHING!
  I have the EMU turned on, is there anything else at all I can do or is it the knackers yard for this box?
  
  I had a starview 2 before which I gave to my father(upgraded to a starview 4 box super USB) and the flash etc worked fine with the same software/lead used on this one I just cant understand it?
  
  Any help would be greatly appreciated.

• troontext (23 Apr 2009 8:48)

  Does anyone have a copy or link to ddigital firmware 2007? i've updated recently n it didnt work so need to revert back to original... cheers

• xNicolex (28 Apr 2009 6:07)

  Hi Sc0user,
  
  Dumb blonde here lol! I am trying to set up the digivox t for cxourxs mmds, and it's not working. Each time i perform an automatic/manual scan, it picks up the channels, but when i try to go to one of the channels, it says that it's a 'bad channel/scrambled', i don't know what it is i am doing wrong and it's really bugging me. U appear to be the man to go to in relation to this stuff so just said i'd give it a shot. Any help much appreciated! I've read about some secret menu, but don't know if that is anything to do with it. Can you help me? Thanks, Nicole

• Evastar (29 Apr 2009 6:47)

  Thanks scouser :)

• Gearoid60 (30 Apr 2009 12:12)

  scouser my eurovox tx when i try putting in codes it wont store and it goes bck to ffff
  any chance u know what the problem is bud

• Gearoid60 (30 Apr 2009 12:12)

  scouser my eurovox tx when i try putting in codes it wont store and it goes bck to ffff
  any chance u know what the problem is bud

• Gearoid60 (30 Apr 2009 12:12)

  scouser my eurovox tx when i try putting in codes it wont store and it goes bck to ffff
  any chance u know what the problem is bud

• tooloud (01 May 2009 5:28)

  ok scouser ur a busy man but hope u can help. i have a starview 1 and the heat sinc came loose didnt know plugged it in and it worked when i moved the box it tripped out the electric now nothing on box at all gotower going in and through the on/off switch and i am picking up power on the small board (the heat sinc stayed within the confines of the small pcb) i posted for helpand someone said the pancake shaped yellow thing at the side of the transformer was a fuse and i should test it for power i have done this and am getting a reading across the 2 legs of the fuse. at a total loss now dont know how to test the board where to test the board what power readings i should get or how to narrow down the possability of where the problem might be.
  if you got any idea,s at all ( not chuck it and get a new one lol)
  please let me know (want to watch the fight tomorrow)
  if not just let me know by email tonycroft1958@hotmail.com but let me know either way cheers

• sc0user (01 May 2009 19:31)

  @Gearoid reflash, factory reset and scan again.
  
  @tooloud change the C11 capacitor, if it doesnt work after that, you can pick up a new PSU on ebay for about a tenner.

• BlueBoy32 (04 May 2009 9:51)

  sc0user - great to see you are active and still helping you did it before for me - I was on boardsie and I came across you answering the problems there as well
  I have two questions for you please if you can help
  1. I have a starview and eurovox and I was just wondering will they be able to take the new codes if a fix for nagra 3 is found - am I right in saying that
  there will be 3 keys with 32 characters in each key.
  2. Can you tell me if there is a problem with 394.250 I have lost all the channels which were on it on both of the boxes and cannot find them - am I doing
  something wrong.
  Again thanks for all of the help and information you povide - even at work when the boxes come up your name is always mentioned as a grets source of help.

• craig26 (06 May 2009 4:43)

  hello
  
  Sc0user just wondering if you could help me i need a channel dump for a digivox xl for bristol area as every time i tune it it its missing some channel info
  Many Thanks Craig26

• golf69 (09 May 2009 12:02)

  sc0user, can you help me please! i have a nokia dbox and codes have been blocked!! i have tried entering new codes but nothing is happening. can you offer any help. regards... golf69

• oxosbase (09 May 2009 12:30)

  hi m8, youve helped me in the past hope you can again. a friend has just dropped his eurovox 2008 off for me to look at, says it aint working. mine is working fine so i unplugged mine and plugged his in, all im getting is a ticking from inside. no lights on the front. is there a factory re set i can do or is poorly?

• magser1 (30 May 2009 9:19)

  Hi scouser, i have just given my brother a nokia box, he is in Wexford on chor*s, all i am getting is approx 44 tv channels, virg*n media is on the box.
  when i go into scan the box i am unable to input a scanning location for wexford. is it the wrong image for enniscorthy. Also, i am trying to locate a net
  id number for enniscorty., thanks

• Kingfix (06 Jun 2009 10:18)

  Hi,scouser just wondering if you could spare some time and just point me in right way with jtag my max v 2008 ( i have notice you seem pretty clued up with it!)Its got the omega chipset so i've been using skymax only it won't connect just says DCU fail.I have converted the lpt into a usb with null modem cable and a 9 pin to usb as i only have laptop so could'nt just connect to lpt port,is this the problem.Also box has no lights but relay does click on power up,sorry to drone on but i've almost eaten my entire left hand,cheers!!!

• lemmok (06 Jun 2009 20:40)

  sorry to intrude but the seasons over now so what's a man to do. Thanks for all you help and since the old starview has become a nifty savings box for the children (stops them putting soldiers in the dvd to watch war movies) it is time for transfers. Is there a box out there you might know of that does everything by way of HD, Audio, Disk storage DVD play and record and suitable for the Nag 3 decode. i'm avoiding the itgate because of linnux so if you came across anything as my head is melted. Thanks

• lemmok (06 Jun 2009 20:40)

  sorry to intrude but the seasons over now so what's a man to do. Thanks for all you help and since the old starview has become a nifty savings box for the children (stops them putting soldiers in the dvd to watch war movies) it is time for transfers. Is there a box out there you might know of that does everything by way of HD, Audio, Disk storage DVD play and record and suitable for the Nag 3 decode. i'm avoiding the itgate because of linnux so if you came across anything as my head is melted. Thanks

• netguy40 (13 Jun 2009 7:29)

  hi sc0user
  the digivox xl and xl usb have firmware for both now
  
  thanks

• moh6299 (23 Jun 2009 15:25)

  hi was wondering if you could direct me to buying some EUROVOX EX1000 SLIMLINE times 10 thanks i asked you because i dont want fake ones thanks

• Kirran (24 Jun 2009 10:46)

  HI, aplogies if i'm bypassing some protocol here but i was hoping you could point me in the right direction for an image for my Sagem box2 (x1 intel). I've tried both versions of the latest command 10 and 11 but fail to get anything but FTA. I used a IFA to flash the image, reconnect my box and performed a full scan nut to no avail. Am i missing something; do i need to complete the network IPs?, loaction in config or even check all the right files are in the right location within the Sagem dir structure? Many thanks in advance.

• BlueBoy32 (24 Jun 2009 17:31)

  Sc0user - just looking for your advice and help. I have both a Starview and Eurovox which are now almost useless and I was wondering about a Kryptview A570.
  I was wondering what you think of it - does it use codes as the others and is it Nagra 2 - do you know of a supplier - I live in Dublin and am on N*L.
  Again thank you very much -you have replied to me before and I always keep an eye on your topics.

• dooyorker (25 Jun 2009 11:37)

  Hi there,
  Quick query for you. The cable signal coming into my apartment is crap - (probably split as the landlord has made 3 apartment out of 1 house)
  Anyway do you know of any product/device that would strenghten the signal?
  Any help would be much appreciated.
  Thanx for your time

• yokibear (26 Jun 2009 19:12)

  can you pme please where to get sv 4 in dublin many thanks sc0user

• sc0user (27 Jun 2009 20:37)

  Sorry all I very rarely look in here so better off asking queries on the forum ;)

• mallynthe (05 Jul 2009 21:44)

  Can u tell me if i can get Lfctv on the starview 4 ntl ireland. My son loves Liverpool and i would love to get this channel for him. Ive had starview 4 the last6 months now but never came accross that channel. I have the atest fix that came out on the 25th of june am i missing something? your time would be appreciated.

• teza12 (17 Jul 2009 13:02)

  hi scOuser. tezza 12 ive just got the new eurovox ex5100, 2009 adition good machine not bad to set up as well,thats good for an oldie,if you want info abbout the set up let me know,tezza12.....

• vin1974 (22 Jul 2009 16:30)

  I'm in dunshaughlin area chorus changed from dvb t to dvb c. I was told starview 4 super box might work so i took a chance and got one but cant get it to work. Can you help on this i'm getting no signal

• dinnen16 (26 Jul 2009 9:12)

  have u got a channel dump file for ntl dublin.i have a ex 5000 pvr thanks.i downloaded de software but de box is stuck on 0000.any help.

• mobsvid (08 Aug 2009 18:45)

  Hi,
  
  i have a eirovox ex5100 pvr and i have entered pin protection because of the kids, unfortunately the pin i thought i used is not working and every channel is now pin protected. how can i reboot or get a default pin number. please help?

• gerry760 (13 Aug 2009 5:40)

  Hi sc0user i have a problem with a box super usb and satsmo put me on to you. Here are the details. I put in the lastest firmware and it worked fine. A few days later i turned it on and nothing happened. I did a factory reset and reloaded the firmware using the usb stick. When i went to usb to load the s/w and pressed ok nothing happened. I have tried this a few times and still nothing happens. The channel scan is not working in that nothing is coming though. I have loaded version 1.10 beta and the s/w loaded but nothing came through on the channel scan. I did a reset to clear the s/w but it is still showing version 1.07. Should the reset clear all s/w off the box? There are no channels at all on the box not even rte1 or setanta. Hope you can help.

• mussy71 (22 Aug 2009 6:43)

  hi scouser just got a eurovox ex1000sl got the free 2 air rest scrambled tried the firmware and the usb connector aint workin either need help big time head done in wiv it fellabut u wud say plastic on the wirral

• col331 (26 Aug 2009 8:45)

  hi scouser could you help me i bought a starview 4 and i live in ire i have connected it up and i am trying to get it to work but it won't pick up any channels

• chris1160 (06 Sep 2009 10:24)

  Hi sc0user pls could you help me ive got the starview box 4 usb i can pick channels up but no sound ive checked all leads checked my starview 1 box with the same leads and its fine works perfect any ideas would be very gratful thanks.my email is christhered1960@hotmail.com cheers m8.

• bluetate (24 Sep 2009 10:51)

  hello,scouse i hope you can spare me some of your time,i have the dreaded 8882 on sv4 i have bought the max232 and done all of this....hi, you will need a max 232 adaptor to fix this error
  Fix For Error 8882
  Use loader GTROM-V25 loader
  1. Connect RS232 Null Modem cable between PC & Max 232 Adaptor
  2. Open the lid of your sv4 and look directly behind the USB you will see a 4 Pin connector
  Looking at this from front view pin 1 = vcc+ Pin2 =TX Pin 3 = RX Pin 4= Ground
  3. Using your max232 Adaptor connect the Wires to corosponding pins Vcc to vcc Tx to Tx Rx to Rx Ground To Ground
  4. Select Serial port COM 1 Etc Baud Rate Fixed As 115200.
  5. Browse the BIN file to download and select File Type
  6. Click DOWNLOAD first and turn the receiver power OFF/ON to download
  7. After download completed ,wait another 30 seconds more until rebooting finished.
  I hope this will get you all out of this misery of error8882 Attached is the loader and bin file
  Needed
  8. if Error Appears check the reason an try againor follow the reason displayed
  
  I dont know how to get the GTROM-V25 LOADER ?and when am downloading v1.12.bin it downloads on to the pc screen but nothing happens to the sv4 box the numbers just stay the same 8882,should i get a box on the screen like sv3 when downloadig is complete!what am i doing wrong scouse,i hope you can help thanks bluetate

• leeanna1 (28 Sep 2009 6:01)

  hi can you help me bought eurovox box but cant seem to get it to work can you help lpool area
  thanks

• scott77 (04 Oct 2009 5:56)

  hi scouse can you help wwe on tonight do you know what channel or freq on a sv4

• abequasdi (06 Oct 2009 19:07)

  Hi Scouser,
  I live in Birmingham...Virgin unplugged my connection from the street....do u know how i can connect it again????
  Plz reply asap!!!

• antswain (17 Oct 2009 6:20)

  hi m8 ,trying to locate fta 101 file . i have loader from years ago i seem to have problems with emos file it wont load any ideas
  thanks

• catam (26 Oct 2009 17:03)

  are there people working on a nagra3 fix for ireland? if so and they are sucessful will firmware be posted on this site. i was advised not to hold my breath,
  but i believe if man can make it man can break it

• fitzy1 (29 Oct 2009 8:08)

  Hi Mate
  I live in Manchester I have a Black eurovox 2008 I have problems with sticky pictures, is there new software or codes i need please keep it as simple as you can as i am a novice at this , PS I hate to say it but cobg on last w/end 25/10/09
  Regards
  Fitzy

• baz123 (05 Nov 2009 15:20)

  Hello scouser, i am new to this site but have been looking for such a long time for frequencies in my area as i have lost some channels. I have done everything possible, power scan, factory settings, updates etc.. but i havent tried putting in the frequencies myself, the main channels missing are zee tv, zee cinema, star plus, star new.. i live in wolverhampton, west midlands area.
  
  Hope u can help.. many thanks..

• cena12 (09 Nov 2009 13:31)

  hey scouser,normally jst read all the post,im a liverpool fan myself!!! i c ur name on it alot.have ex5000 myself,got new key codes 3rd hand last nite,using chroxs in limerick ireland,seem to b missing 1 digit,5e 01 01,key 00. aa 26 9e f2 e1 4d 1a e?the lad said it was the nag 3 fix.can u r ur friends confirm.thanks either way

Post your comment

In order to post your comments here, you need be logged in to our system. Simply follow this link in order to login and to post your comments here.