DVD-RB Pro + CCE SP 2.70 "installation + full guide"

15 Nov 2006 20:00 (Edited: 15 Nov 2006 20:00)

<><> How to install and use DVD-RB Pro + CCE SP 2.7 guide by Alkohol <><>

NOTE: this is just a basic guide for newbies or those that are interested on using DVD-RB Pro + CCE SP only.

WARNING: please don�t use cracked versions, DVD-RB Pro is merely $30 and to be honest, it�s worth every penny. I never used DVD-RB Basic; I went straight with the Pro version and never looked back. Please support Jdobbs for all of his hard works.

A big thanks to Jdobbs for creating such a beautiful tool for the few of us, especially those that values the �quality� of their DVD backups.

This guide will cover:
� The installation of DVD-RB Pro
� Encoder�s Configuration
� DVD-RB Pro�s basic settings
� Basic Encoding steps using DVD-RB Pro + CCE SP 2.70

Tools
� DVD-RB Pro [ link ]
� CCE SP [ link ]
� ProCoder 2 [ link ]
� Hank's HC Encoder [ link ]

NOTE: a lot of people either use DVD-RB Pro + CCE SP 2.70 or ProCoder 2. Some says ProCoder 2 is better than CCE SP, yet some preferred CCE SP over ProCoder 2 due to preference. However, CCE SP 2.70 is faster, there's no doubt about that. So the choice is yours.

<><> STEP 1: DVD-RB Pro Installation <><>

Once you've legally purchased DVD-RB Pro and Jdobbs has sent you a "setup" zip file with your "key file" via email. Click on the "setup" to run.

You can either create or don't create a Start Menu folder.

Create a folder in your hard drive for DVD-RB's "Work Folder", then browse and locate the folder.

Create a folder in your hard drive for DVD-RB's "OutPut Folder", then browse and locate the folder.

NOTE: if you have 2 hard drives, then set "OutPut Folder" to another drive, this will run smoother in my opinion.

<><> STEP 2: Encoder's Configuration <><>

NOTE: this is where you need to choose CCE SP or ProCoder as your engine.

NOTE: click YES here, but use the SETUP via DVD-RB Pro's Settings "Path to CCE SP NEW" to CCE SP directory.

NOTE: if you have Canopus ProCoder, choose ProCoder.

<><> STEP 3: DVD-RB Pro's Settings <><>

click on Settings, then Setup.

(1) click ALL (2) scroll down and untick ENGLISH or whatever your desire language (3) click SAVE

(1) Again, click ALL (2) scroll down and untick ENGLISH or whatever your desire language (3) click SAVE

Here you can remove DTS Audio or Director's Comments. The choice is yours.

Mode, Encoder (CCE), then tick on CCE Mode (or your desire encoding engines).
I like to use "One Click Mode" because this automatically does all the jobs for you.

Mode, Backup Mode (Full Backup) and choose your desire backup mode.

Mode, Steal Space from Extras, then choose whatever your desire (10%, 25%, 33% or 50%).

Click on Settings, CCE Settings, CCE SP, Advanced (Experts) Settings

Slide the bar to the right for more PASSES (or to your desire). The most I used is 3 PASSES because I don't have the latest rig, so 3 is good enough for me.

Now just click SAVE.

<><> STEP 4: Encoding process using DVD-RB Pro + CCE SP 2.70 <><>

Click on the Folder to browse and locate your movie to be encoded.

Locate your movie, then click OK.

This is where DVD-RB Pro is going to put the finished �ready to burn� files here.

When everything�s set, click Backup .

Now DVD-RB Pro is encoding, so just relax and sit tight.

Now Phase II ENCODING is completed.

Now Phase III REBUILD is completed. Overall, it took 149 minutes to finish with 3 PASSES. Not too bad for my old P4, 2.66GHz, I guess she's alright.

That�s it, DVD-RB Pro has successfully encoded and imported the �ready to burn� files into the �Destination Path� folder. Just open up ImgBurn, Nero Burning Rom or your desire burning engine and burn your already encoded files.

Enjoy it!

DVD-RB Pro + CCE SP 2.70 "installation + full guide"

List of my blog entries

User comments

Post your comment


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.